1951 Dodge Truck Streetrod Cruisein Ready A Real Eye Catcher Injected V6 on 2040-cars

Auto blog

FCA recalls 1.1 million vehicles worldwide due to confusing shifter

Fiat Chrysler is recalling 1.1 million vehicles worldwide to address the problematic shifter used on cars with eight-speed automatic transmissions. The issue is that the console-mounted shifter acts like a rocker switch and always returns to the middle position after moved. This has been deemed confusing to drivers – confusing enough to cause some to exit their vehicles without first selecting Park and leading to the car rolling away. FCA says 41 injuries are related to the shifter problem, and no evidence of equipment failure has been found. The company will enhance warning chimes and alter the shift strategy, meaning alert messages will be displayed in case the driver door is opened while the engine is running. With the door open, the transmission will prevent the car from moving even if Park is not selected. The affected vehicles are certain model-year 2012–2014 Dodge Charger and Chrysler 300 sedans, as well as model-year 2014–2015 Jeep Grand Cherokee SUVs, an estimated 811,586 US vehicles in total. The recall also affects 52,144 vehicles in Canada, 16,805 in Mexico, and 248,667 vehicles elsewhere. The shifter is used with ZF-designed and ZF-built eight-speed automatic; Audi uses a similar shifter setup in some of its vehicles, including the current-generation, which predated Chrysler's use of it. Chrysler uses a different, a rotating-dial-type shifter on eight-speed-equipped Rams. The company moved away from the problem shifter design in 2015 for the Charger and 300, and the Grand Cherokee's shift lever was modified for 2016. Owners of affected vehicles will be notified of the recall when service is available. Fiat Chrysler urges customers to follow the instructions in the vehicle's owner's manual in the meantime. Related Video: News Source: FCAImage Credit: AOL Recalls Chrysler Dodge Jeep RAM Ownership Safety SUV Sedan

Dodge Viper to out-Hell the Hellcat with supercharged V10?

The Viper wouldn't be the Viper if it wasn't the most powerful model under the Chrysler umbrella. But with the arrival of the Hellcat engine in the Dodge Charger and Challenger, the Viper has fallen behind in the bragging rights department: where the new supercharged V8 produces 707 horsepower and 650 pound-feet of torque, the naturally aspirated V10 offers "only" 640 hp and 600 lb-ft - gargantuan output figures by almost any other standard, but crucially behind on the SRT power scale. Conner Avenue is going to have to do something about that.
Although the Hellcat's engine reportedly won't fit under the Viper's hood, SRT is now rumored to have another trick up its sleeve: supercharge the existing V10. According to the Pentastar performance enthusiasts at allpar.com, Chrysler has already taken delivery of the first such prototype engines so that it can begin the process of fitting it into an upgraded Viper.
The spooled ten-pot is tipped to produce around 800 hp and 650 lb-ft of torque. More than that and the Viper's drivetrain, chassis and bodywork would have to be substantially reworked. Though beefier transmissions are available, fitting them would reportedly set off a domino-game of changes required to handle the added torque. Which may be something Chrysler would be prepared to do for the next-generation model, but in the meantime, 800 hp could prove enough to put the Viper back atop the Mopar performance ladder where it belongs, and give it an edge against the new Corvette Z06 to rekindle sales.

FCA goes all-in on Jeep and Ram brands on cheap gas bet

It's no surprise that as SUV and truck sales remain strong in the wake of unusually cheap gas, Jeep and Ram sales are taking off. What is a surprise is that FCA CEO Sergio Marchionne thinks that cheap gas will be a "permanent condition," and feels strongly enough about it to change up North American manufacturing plans. Jeep appears to be the biggest beneficiary of the product realignment. In addition to increasing the sales estimates for the brand worldwide upwards to 2 million units a year by 2018, the brand will get a flood of investment for new product and powertrains. Consider the Wrangler Pickup to be part of the salvo, as well as the Grand Wagoneer three-row announced in 2014 as part of the original five-year plan. The Wrangler four-door will get at least two new powertrains, a diesel and mild hybrid version, in its next generation. That mild hybrid powertrain may utilize a 48-volt electrical system like the one that's being developed by Delphi and Bosch – which the suppliers think will be worth a 10 to 15 percent fuel economy gain at a minimum. Down the road, in the 2020s, the Wrangler could adopt a full hybrid system. The diesel powertrain is planned for 2019 or 2020. The Ram 1500 is also pegged to receive a mild hybrid system, again potentially based on 48-volt architecture, sometime after 2020. Lastly, Jeep and Ram will take over some of the production capacity of existing plants. The Sterling Heights, MI, plant that builds the Chrysler 200 will now build the Ram 1500; the Belvidere, IL, facility that produces the Dodge Dart will take over Cherokee output; the big Jeep facility in Toledo, OH, will be used for increased Wrangler demand. In 2015, according to FCA's numbers, car and van demand went down by 10 percent, but SUV demand went up 8 percent and truck demand 2 percent. Considering that these are high-margin vehicles, FCA can't ignore the math. FCA also won't build any new factories to supplement production to meet demand, but instead are reshuffling production priorities. Think of it this way: FCA is gambling on cheap gas being a permanent part of our lives, at least into the 2020s. By doubling down on SUVs and trucks, the company stands to win big, unless a spike in gas prices changes the landscape. FCA isn't talking about a Plan B, so they're all in. It'll be interesting to see how this plays out.