2004 Dodge Neon Se Sedan 4-door 2.0l on 2040-cars
Houston, Texas, United States
Body Type:Sedan
Vehicle Title:Clear
Engine:2.0L 1996CC 122Cu. In. l4 GAS SOHC Naturally Aspirated
Fuel Type:GAS
For Sale By:Private Seller
Number of Cylinders: 4
Make: Dodge
Model: Neon
Trim: SE Sedan 4-Door
Drive Type: FWD
Number of Doors: 4
Mileage: 150,000
Thanks for view.
You are bidding a 2004 Dodge Neon. I had the following repairs made within in March , 2013:
- Brake pads on the front wheels
- Timing chain replaced
- Hub caps...one fell off the right front side. There only three now.
- Had instrument cluster replaced.
The speedometer does not work any more. It stopped at 150,000 miles and I stopped driving it. I decided to sell it.
This car has a small paint peeling on the right side back trunk and the front grill has a small chip paint
On the left back side there is a small dent above the left tire. See pic.
The interior has few spots on the seat.
This car drives and A/C and heat runs.
Happy bidding.
Dodge Neon for Sale
Auto Services in Texas
Yale Auto ★★★★★
World Car Mazda Service ★★★★★
Wilson`s Automotive ★★★★★
Whitakers Auto Body & Paint ★★★★★
Wetzel`s Automotive ★★★★★
Wetmore Master Lube Exp Inc ★★★★★
Auto blog
Will Dodge limit 2015 Challenger SRT Hellcat to 1,200 units?
Sun, 20 Jul 2014With over 700 horsepower on tap and a price tag barely over $60k, Dodge appears on paper to have a winner on its hands with the new Challenger SRT Hellcat. But if you want to get your hands on one, you may have to act quicker than this most powerful of muscle cars covers the quarter-mile.
That's because, according to our compatriots over at Edmunds, Dodge may limit production - in the first year, at least - to just 1,200 units. That would amount to barely a quarter of the Challengers that Dodge moves each month, and would also mean only one Hellcat for every two Dodge dealers in the US - which could lead to some serious contention over which stores and which customers can get their hands on the ultimate Challenger.
Reached for comment, SRT spokesman Dan Reid told Autoblog that "there is no plan to limit production of the Challenger Hellcat," echoing the words of Dodge CEO Tim Kuniskis who told Edmunds: "We don't know what the market demand is." Which doesn't mean that it won't restrict production, but doesn't mean that it will, either. It just hasn't decided yet - or announced any such decision, at any rate - over what will be the final allocation strategy for what could be a game-changing muscle car. That is, at least, until new versions of the Mustang and Camaro come along in pursuit of Dodge's bragging rights...
2015 Dodge Charger Pursuit prepares to keep Hellcats in line
Wed, 13 Aug 2014Earlier today, Dodge pulled the wraps off its 2015 Charger SRT Hellcat - a 707-horsepower sedan capable of sprinting to 60 miles per hour in 3.7 seconds and reaching a top speed of 204 mph. Naturally, the car debuted in a bright shade of pull-me-over red, so it was fitting, then, that Dodge also brought its newly updated 2015 Charger Pursuit to keep everything under control.
No, cops won't be able to spec their Charger cruisers with the 707-hp Hellcat engine (oh man, imagine the chase scenes...), but law enforcement officials will be able to choose from either a 3.6-liter V6 or 5.7-liter Hemi V8, producing 292 hp and 370 hp, respectively. V8 models can be ordered with all-wheel drive, and Dodge estimates that with either engine, the Charger Pursuit can achieve up to 26 miles per gallon on the highway (thanks to the V8's four-cylinder mode).
Other updates for 2015 include improved braking power, a seven-inch display in the instrument cluster, a five-inch display in the center stack, and a new vehicle systems interface that could make it easier for police squads to install computer and radio equipment.
Jeep Grand Cherokee, Dodge Durango still catching fire after recall
Thu, May 7 2015Automakers issue recalls all the time. It's part of the cost of doing business. We just assume that once the recall has been carried out, the problem in question has been fixed. But that's not always the case, as this latest investigation being undertaken by the National Highway Traffic Safety Administration goes to show. The problem stems back to a recall issued by Chrysler last summer. It revolved rather the sun visor in the SUVs it makes at its Jefferson North Assembly Plant – specifically, the screw affixing the sun visor could end up rubbing against the wiring for the lamp in the vanity mirror, potentially causing an electrical short and even a fire. 62 such short circuits, 38 fires and three injuries reported, prompting Chrysler to recall nearly 900,000 units of the 2011-2014 Jeep Grand Cherokee and Dodge Durango (over 650,000 of them in the United States). The plastic spacers they installed to rectify the problem, however, may not have done the trick. Eight reports (but none involving injuries) have been filed with the NHTSA regarding the same issue recurring, spurring the government agency to open a new investigation into the matter. If deemed necessary, the NHTSA could ask FCA to issue another recall to fix the issue again, which we may necessitate the installation of a fuze to prevent any such the electric short. Related Video: INVESTIGATION Subject : Headliner Fires Date Investigation Opened: MAY 01, 2015 Date Investigation Closed: Open NHTSA Action Number: RQ15003 Component(s): ELECTRICAL SYSTEM , INTERIOR LIGHTING Manufacturer: Chrysler (FCA US LLC) SUMMARY: On July 1st, 2014 Chrysler (FCA US LLC) issued safety recall 14V-391 to remedy a wiring-related fire hazard on the headliner of approximately 661,888 model year (MY) 2011-2014 Jeep Grand Cherokee and Dodge Durango vehicles manufactured between January 5, 2010 and December 11, 2013. The recall was in response to the Office of Defects Investigation (ODI) investigation EA14-001 during which data provided by Chrysler indicates that the fire is caused by an electrical short in the vanity lamp wiring for either one of the sun visors mounted on the vehicle. The sun visors are mounted to the roof of the vehicle through the headliner with three metal screws.