2006 Dodge Magnum Sxt Wagon 4-door 3.5l on 2040-cars

Auto blog

2015 Dodge Challenger crash test results slip from last year's model

The National Highway Traffic Safety Administration has released the results of its latest round of crash testing, announcing that the 2015 Dodge Challenger has netted a five-star overall crash rating. Of course, Chrysler won't want us to tell you this, but that NHTSA overall rating is not the whole story here. As The Car Connection so astutely points out, five-star rating aside, the refreshed 2015 Challenger actually performed worse than when it was tested back in 2013. The V6-powered SXT model tested by NHTSA in this latest round of testing was only able to record a four-star rating in its frontal crash test, while it nailed a five-star rating in the side-impact test. The 2013 Challenger managed a five-star rating in the frontal test. Of course, while this rating is a sign of overall good news for Challenger fans, the car, as TCC argues, has yet to be tested by the Insurance Institute for Highway Safety. It'll be interesting to see if these NHTSA ratings translate to an IIHS Top Safety Pick or Top Safety Pick Plus. Scroll down for the full press release from FCA. All-new 2015 Dodge Challenger Earns Five-Star Overall Safety Rating From U.S. National Highway Traffic Safety Administration 2015 Dodge Challenger coupe earns five stars overall, the highest possible score in NHTSA's safety rating program More than 70 safety and security features, including new for 2015 class-exclusive Forward Collision Warning, adaptive cruise control, Blind-spot Monitoring and Rear Cross Path detection All-new 2015 Dodge Challenger starts at $26,995 (excluding tax, destination and title) December 18, 2014 , Auburn Hills, Mich. - The all-new 2015 Dodge Challenger has earned a five-star overall safety rating from the U.S. National Highway Traffic Safety Administration (NHTSA). Five stars is the highest possible safety rating given by NHTSA. "The new Dodge Challenger coupe further demonstrates our commitment to broaden the proliferation of advanced safety technologies, such as driver-assist features," says Scott Kunselman, Senior Vice President-Vehicle Safety and Regulatory, FCA-North America. In its assessment of the new Challenger, NHTSA notes the availability of Forward Collision Warning (FCW), which features forward-facing sensors programmed to detect the potential for certain types of frontal collisions. If detected, the driver is alerted with visual and audible warnings. The 2015 Dodge Challenger is the only car in its segment with such capability.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

FCA plants skipping summer shutdown to keep up with demand

Hopefully, some FCA US factory employees don't have big plans for the usual summer shutdown, because the automaker is keeping several plants running this year. Demand is so high that the company wants to keep models rolling off the assembly lines. Four FCA US assembly plants, all the engine factories, and some locations that build transmissions are staying open throughout the summer, according to the Detroit Free Press. Usually, these sites would see a two-week shutdown for the company to retool and perform repairs. This year, factories are staying open for FCA to support its strong sales. The lines that remaining humming through the summer show an inclination toward the automaker's popular SUV's and crossovers. They include the Jefferson North Assembly Plant in Michigan that builds the Jeep Grand Cherokee and Dodge Durango; Saltillo Van Assembly in Mexico that constructs the Ram ProMaster; Toledo Assembly Complex in Ohio that produces the Cherokee and Wrangler; and Toluca Assembly in Mexico that makes the Dodge Journey and Fiat 500. Related Video: News Source: The Detroit Free PressImage Credit: Bill Pugliano / Getty Images Plants/Manufacturing Dodge Fiat Jeep RAM FCA dodge journey fca us ram promaster Jefferson North Assembly Plant