2000 Dodge Grand Caravan Se Handicap Van 3.3l Clean Title Low Miles on 2040-cars

Auto blog

Dodge recalling 2k SRT Hellcat Challengers and Chargers for fuel leak

Bad news for fans of the obscene output of the Dodge Hellcat twins, as FCA has announced a voluntary recall of both 707-horsepower variants of the 2015-model-year Charger sedan and Challenger coupe. According to FCA, a total of 2,211 cars are being recalled after a dealer discovered a "possible fuel leak" during a pre-delivery inspection. Despite getting cleared by suppliers, FCA claims its engineers found "improperly installed" hose seals. Owners of affected vehicles will receive notification and be asked to report in for repairs. Of the vehicles affected, the overwhelming majority, 2,012, were sold in the US market. The remainder were sold in Canada (148), Mexico (30) and just 21 outside of North America. Scroll down for the official release from FCA. Related Video: Statement: Hose Seals March 1, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 2,211 cars globally to replace fuel-delivery components that may leak. An FCA US dealer alerted the Company to a possible fuel leak following a pre-delivery vehicle inspection. These components had passed the supplier's leak-testing, but FCA US engineers launched an investigation and discovered certain hose seals may have been improperly installed. The Company is unaware of any related injuries, accidents or customer complaints. Affected are model-year 2015 Dodge Challenger SRT coupes and Dodge Charger SRT sedans equipped with 6.2-liter V-8 engines. There are an estimated 2,012 in the U.S.; 148 in Canada; 30 in Mexico and 21 outside the NAFTA region. Affected customers will be notified and advised when they may schedule service. Customers with questions or concerns may call the FCA US Customer Information Center at 1-800-853-1403.

2015 Dodge Viper getting small increase in power

The Viper is used to being the most powerful car in the Dodge and SRT stables, but the arrival of the 2015 Dodge Challenger SRT Hellcat means that's no longer the case. The serpentine supercar is, however, reportedly getting a small boost in output for 2015, amounting to all of five horsepower.
The increase was uncovered by Road & Track courtesy of the SAE J1349 certification process to which Detroit's Big Three automakers submit themselves and which reports the Viper's output at 645 hp instead of the 640 it was rated at until now. There are a hundred factors that could have contributed to the relatively mild boost in output (best guess? nothing at all changed...), but we doubt anyone's going to complain about some extra horses under the hood.
The five-horsepower boost brings the Viper that much closer to the 650-hp Chevy Corvette Z06, not to mention the 707-hp Hellcat, but the Viper's impressive power-to-weight ratio ought to mean it'll have little problem keeping up in a straight line - which is just one of the reasons why Chrysler won't shoe-horn the Hellcat into the Viper: as R&T points out, the supercharged engine is too heavy and the blower makes it too tall to fit in the Viper's engine bay.

Dodge Viper recall requires small-handed mechanics

It has been over a year since Chrysler first announced its recall of 3,660 2003-2004 Dodge Vipers because the airbag could suddenly deploy. The repairs are finally beginning, and it appears to be a nightmare for mechanics.
According to the automaker's filing with the National Highway Traffic Safety Administration, the airbag control module can fail, which causes the bag or the seatbelt pre-tensioner to deploy without warning. It took over a year to design the new parts, according to The New York Times. However, Chrysler finally has a new "jumper harness with an in-line diode filter circuit" ready to fix the problem.
The dilemma now moves to the mechanics who have to actually install the part. A 47-step guide from Chrysler explains that the procedure should take about two hours. It's not an easy job, though. Most of the dashboard has to be taken apart, and the instructions include this helpful bit of advice: "Installing the jumper harness and filter box into position is not an easy task. Patience, perseverance, and small hands are required." We wish the best of luck to them. The fix comes just in time for the Vipers to enjoy the summer sun.