2022 Dodge Durango R/t on 2040-cars

Auto blog

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

Dodge Challenger Hellcat driver arrested hellbound at 160 mph

When fisherman catch big fish, they want the world to know about it. That's approximately how the Indiana State Police felt when they busted a 707-horsepower muscle car booking it at more than 160 miles per hour. The ISP were chuffed enough about the catch that they put out a press release titled, "160 Mile Per Hour Hellcat Tamed On The Indiana Toll Road." The Dodge Challenger Hellcat driver, J. Jesus Duran Sandoval, told the arresting officer that he was "just trying to get to Maryland." The incident began just after Trooper Dustin Eggert finished helping a stranded motorist on the toll road at about 7 p.m. Eggert was merging back into traffic when he saw the Hellcat blast past at well beyond the 70-mph speed limit, allegedly weaving through traffic and — shock! — not using a turn signal for lane changes. With a Bandit on his hands, Eggert took the role of Smokey, and just like Burt Reynolds movies, couldn't catch the offender. Seems that Indiana State Police Dodge Charger Pursuit vehicles are speed limited to 150 mph, allowing the Hellcat to pull away. Eggert radioed for officers ahead to look out for the red baron, but received an assist before other LEOs swooped in: Eggert caught up to the Hellcat 11 miles down the road when the red coupe got held up behind two semis driving next to one another on the two-lane toll road. Sandoval pulled over, admitted he was doing a little more than 160 mph, then delivered The "Maryland" Defense unfazed by the fact that Maryland was more than 500 miles from his location. Turns out that 38-year-old Sandoval, from Lake Geneva, Wisconsin, was also unbothered by driving on an expired license. The coppers took Sandoval to the LaPorte County Jail and booked him on reckless driving, bond set at $505, court date set for April 2. The ISP said this is the second time in two weeks they've busted someone doing more than 130 on the Indiana Toll Road. It's the second time in a year they've busted a Hellcat doing so — in April 2017, another pilot played Bat out of Hellcat at 158 mph, explaining his speed as a bit of show-and-tell for his friends in the car. View 142 Photos Related Video:

That thing got a Hemi? Mopar engine kits make it easier to say yes

Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016