2004 Dodge Durango Slt Sport Utility 4-door 5.7l on 2040-cars

Auto blog

2020 Dodge Charger pricing starts at $31,390

We've been talking about the 2020 Dodge Charger for three months, and it's finally time to start doing the math on trade-in values and loan payments. The 2020 Charger lineup starts with the SXT in rear-wheel-drive trim priced at $29,895, plus a $1,495 destination charge for a total of $31,390. That's a $425 bump over the 2019 model. The rest of the range doesn't get a price bump higher than $250 save for the Hellcat Widebody. The 2019 Charger didn't offer Widebody variants, so those are new for 2020. The lineup with MSRP changes from 2019: Charger GT RWD $33,390 ($150 more than 2019) Charger SXT AWD $35,090 ($25 more) Charger R/T $37,890 ($150 more) Charger Scat Pack $41,490 ($250 less) Charger Scat Pack Widebody $47,490 (brand new model) Charger SRT Hellcat Widebody $71,140 ($2,150 more than 2019 non-widebody) Daytona 50th Anniversary Edition $75,635 (brand new model) There's a price differential of $44,245 from bottom to top. Even more relevant to the Charger faithful, there's a displacement and power differential from the 3.6-liter Pentastar V6 in the SXT with 292 horsepower and 260 pound-feet of torque to the 6.2-liter supercharged Hemi V8 in the Charger Hellcat Widebody Daytona 50th Anniversary Edition with 717 hp and 650 lb-ft of torque. Dodge plumps the Scat Pack in the middle as having the "most horsepower per dollar," with its 392-cubic-inch Hemi V8 pumping 485 hp and 475 lb-ft. In the amusement park business, this is what's called "Fun for everyone." The Scat Pack Widebody makes a break from its standard sibling with stiffer springs, larger sway bars, and shocks, and retuned dampers. Changes throughout the rest of the lineup save for the SXT center on new wheel and tire options, and an updated Performance Handling Group on the GT and R/T trims. The 2020 Charger order book opens in the fall, but America's family-friendly muscle car won't start hitting dealer lots until early 2020.

Dodge Challenger Shakedown: '71 body, new guts

While Jeep has created a number of vintage-bodied custom vehicles with modern components, this year's SEMA show plays host to Dodge's take on the idea. The Shakedown concept began life as a 1971 Challenger and ditched almost everything in it, including the engine and chassis. What's left is a modern car with a retro look. The chassis was a particularly complicated part of the job, since the Challenger was originally a unibody car. However, Dodge chose to separate the Challenger's iconic body from its structural parts, and moved it onto a custom, one-off chassis from which the body can be removed as needed. The chassis also carries lowered suspension, Challenger Hellcat brakes, and a 6.4-liter 392 Hemi V8 connected to a six-speed manual transmission from the Viper. Dodge also installed the engine using the new Hemi engine swap kit from Mopar. With the shaker cold-air intake and custom exhaust, the Shakedown's powerplant makes 485 horsepower. View 13 Photos The body itself received plenty of tweaking as well. Dodge shaved off the drip rails, door handles, and turn signals for a cleaner look, and also fitted the grille, headlights, and taillights from a 2017 Challenger. The whole thing is finished in matte black paint with a "vibrating" stripe offset on the left side. The Shakedown also gets 20-inch Slingshot rear wheels and a pair of custom 19-inch versions for the front. On each fender is a bright red "392" decal that uses the same font as the labels on classic Mopars 360 cubic-inch V8s. Inside, the Shakedown gets the same radical upgrade as the chassis. Two Viper seats accompany a Viper steering wheel, and the rear seats are gone altogether. The Viper gearbox is shifted with a Challenger Hellcat gear knob, and carbon-fiber accents and leather adorn the wheel, door panels, instrument panel and center console. Related Video: Image Credit: FCA, Joel Stocksdale SEMA Show Dodge Coupe Concept Cars Performance

Fiat Chrysler CEO says final merger talks with Peugeot going well

BRUSSELS — Fiat Chrysler's chief executive Michael Manley said on Wednesday that merger talks with Peugeot owner PSA  to create the world's No. 4 carmaker are progressing well and he hopes to have a deal within 12-14 months. Speaking to Reuters on the sidelines of an industry meeting, he said he doesn't expect any major obstacles that could delay a final agreement. "Talks are progressing really well," Manley said about negotiations with the French carmaker ahead of a briefing by the European automotive association (ACEA), of which he is president. His comments come a month after the two carmakers agreed to a binding deal worth about $50 billion to combine forces in response to a slowdown in global demand and mounting costs of making cleaner vehicles amid tighter emissions regulations. Manley's timeline for completing the deal by early 2021 is in line with a forecast made by the companies in December. Fiat and Peugeot are now getting into the details of how the merger will work, including choosing which vehicle platforms — the technological underpinnings of a vehicle — will fit which products in a combined company. Because customers in different locations still prefer vastly different cars, there is room for multiple platforms in a combined group, Manley said. "That global platform is an elusive beast," he added. "This concept of a massive global platform in my mind is almost a myth, but that doesnÂ’t mean to say weÂ’re not going to recruit significant volume." Related Video: