2013 Dodge Dart Se on 2040-cars

Auto blog

A look at the Dodge Demon's drag settings, modes, and go-fast tech

In the same video that gave us a peek at the 2018 Dodge Challenger SRT Demon's performance stats, there's a serious dump of info on the tech and tools that will likely help this muscle coupe slaughter drag strips. Dodge has outlined a few of them for us and we're using the power of inference to figure out the rest. Here's what we've gathered. A lot of these hints come from the Demon's version of Performance Pages, the infotainment screens that show what SRT models are doing and let the driver change the powertrain and chassis setup. There are a lot of Demon-only features, including line lock, a quick cooldown mode for the supercharged engine, and data recording. And of course there are pages to show a digital time slip with acceleration and braking figures, a g-load plot, and lots of gauges to track temps and levels. The engine output is shown in the video on a special Dyno page. It tracks horsepower and torque over time on the upper graph, and engine rpm and shift points on the lower graph. And we think it's still hiding something. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Any good drag car has a line lock, allowing the driver to lock the front brakes and leave the rears free to do a nice tire-warming (or tire-shredding, depending on length) burnout. Ford has it on the Mustang, Chevy puts it on the ZL1, and now Dodge is adding it to the Demon. It should help get the giant Nitto tires up to temp for a drag run. And once the tires are warm, there's launch control, just like on the SRT Hellcat, with selectable rpm to dial things in for the conditions. The Demon also has a shift light in the cluster, and the driver can set a shift point individually for each gear. After each drag run, you can activate Quick Cooldown, which Dodge says uses the first production application of After-Run Chiller – it runs the cooling fan and intercooler coolant pump with the engine off until the coolant reaches its target temp. It's shown in one of the slides above. The checklist on the left side of that page suggests it requires a set of conditions be met to work: engine off, hood open, and sufficient battery level. This further reinforces our theory that the supercharger is going to make big boost, beyond the Hellcat's 11.6 psi. And while you're waiting for the supercharger to cool off for another run, you can review the performance data the car records.

Texas cops pull armed suspect from burning car

A high-speed chase through Fort Worth, Texas ended in dramatic fashion earlier this month when FWPD pulled armed burglary suspects from the burning wreckage of their escape vehicle. According to NBC DFW, Fort Worth police were dispatched to Avington Way on the evening of July 16 to investigate reports of a burglary. The burglary victim told police he had arrived home to find three individuals hauling his property out of his house. When he approached them, one of the suspects pointed a handgun at him and told him to stay back. Then all three suspects climbed into a silver Dodge Avenger and sped away. FWPD officers spotted the Avenger a short time later on Sycamore School Road and, after the car refused to pull over, the chase was on. Police chased the burglary suspects through the city at speeds approaching 100 mph until the Avenger blew a red light and was t-boned by an oncoming pickup at the intersection of California Parkway and James Avenue. As the pursuing officers closed in on the disabled car, it suddenly caught fire. One suspect bailed out and ran for it, but the remaining two were trapped inside with the flames quickly mounting. Despite the spreading fire and the threat of armed suspects in the vehicle, police officers rushed to pull the men from the wreck. The driver was removed easily, but the passenger was unconscious and trapped behind a crushed passenger door. The scene was caught on the officers' body cameras as they pried the door open with their bare hands. Eventually the officers got the semi-conscious man out of the passenger seat just as the car was completely engulfed in flames. "It was pretty dramatic. We recruit people that can think on the fly, think quickly, and perform under pressure," FWPD Sergeant Marc Povero told WFAA. All three suspects are facing charges for burglary, and the driver was charged with evading arrest. News Source: WFAA, NBC DFW Auto News Chevrolet Dodge Driving Safety Truck Police/Emergency Sedan fire car fire burglary

Dodge Viper now available in matte finish

The prospect of buying a new Dodge Viper just got that much more enticing with the introduction of matte-finish paint direct from the factory. Available as part of the "1 of 1" customization program, the matte finishes aren't being offered in just a handful of colors like some other automakers do: customers will be able to specify a matte finish on any of the 8,000 colors that are already part of the program's palette. The matte finish option adds yet another step to the exhaustive hand-painting process that Dodge offers on the Viper - a painstaking endeavor that takes upwards of 145 man hours to complete. Specialists start by applying a base coat and a clear finish, followed by the paint and clear coat. The finished body panels are then smoothed with 1,000-grit paper and polished. A second sanding process is required for the matte finish before the application of a matte clear coat. Specify custom stripes (available in five colors or by custom order) and they're applied under the paint, not as decals on top. The availability of the matte finish in conjunction with the stripe options and new satin badging and fuel cap leads to over 50 million combinations. Needless to say, that means no two Vipers need ever leave the Conner Avenue assembly plant the same – though there will surely always be certain favorite combinations, especially on those units ordered from outside the customization program. Related Video: DODGE EXPANDS INDUSTRY-FIRST '1 OF 1' VIPER CUSTOMIZATION PROGRAM WITH NEW MATTE-FINISH PAINT OPTION - New matte-finish exterior paint available on all of Viper '1 of 1' program's 8,000 exterior color options and 24,000 stripe options - Viper's custom '1 of 1' exterior paint options double to 16,000 exterior colors and 48,000 unique strip combinations - Matte finish available in all exclusive '1 of 1' program and standard production colors - In addition to matte-finish exterior paint, Viper customers can choose between satin chrome or satin black badging and fuel filler door for a sinister appearance - Dodge Viper owners can build their one-of-a-kind Viper from more than 50 million unique build configurations for the ultimate in model year exclusivity June 19, 2015 , Auburn Hills, Mich. - The Dodge brand continues to expand the Viper's exclusive production elements like never before.