2014 Dodge Charger R/t on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Hellcrate 6.2-liter V8 delivers plug-and-play Hellcat hype to SEMA

SEMA just provided another entry for the folder marked "What A Time To Be Alive," with Mopar's announcement of the "Hellcrate" 6.2-liter supercharged Crate HEMI engine. Enthusiasts have been desperate to upgrade their vintage rides with the woozy thrills provided by Dodge's Hellcat motor, so Mopar answered. The Hellcrate engine assembly ships in plug-and-play configuration, in specially designed packaging with "Hellcrate" logos. The assembly sells separately from the Hellcrate engine kit, the kit adding a powertrain control module, power distribution center, engine wiring harness, chassis harness, accelerator pedal, ground jumper, oxygen sensors, charge air temperature sensors, and fuel pump control module. The PCM comes programmed with the production-car engine's 707 horsepower and 650 pound-feet of torque. An optional front-end accessory drive kit contributes peripherals like alternator, power steering pump, belts, and pulleys. Don't bother trying to lash up a sleeper 1997 Chrysler Sebring, though; Mopar tuned the Hellcrate for pre-1976 vehicles and manual transmissions. The engine assembly retails for an MSRP of $19,530, and the kit wants a further $2,195. Mopar didn't announce pricing for the accessory drive kit. The engine and kit come with a three-year, unlimited-mileage warranty when bought together. The Mopar Hemi Crate website will be happy to take your orders as of now. For help envisioning the possibilities, stop by Fiat Chrysler's 15,345-square-foot SEMA booth to check out the Limelight Green, Hellcrate-powered 1970 Plymouth Superbird clone worked up by Mark Worman of Velocity's " Graveyard Carz." While you're there you might as well peep Worman's encore, a 1968 Plymouth GTX stuffed with Mopar's 392 Crate HEMI in place of the original 440 big block, and the 1937 Dodge pickup that swallowed a Mopar 345 Crate HEMI. Mopar's come a long way from its original product: antifreeze products. Tomorrow it'll be Jeep's turn to ring the SEMA bells, once the noise dies down from the Mopar-jacked Wrangler Switchback, CJ66 and Jeep Shortcut. You can watch the brand's presentation online at 7:26 p.m. ET/4:26 p.m. PT. Until then, we're going to work the angles on a Hellcrate-powered Plymouth Volare. The sedan, naturally. Because we're practical. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Dodge engineers trying to shoehorn Pentastar into Dart?

The fact that the Dart's launch has been a pretty dismal affair isn't what we'd call secret. Judging by its mounting inventories and poor critical reception, Dodge's successor to its unloved Caliber has struggled since it hit the market. And while both of those are difficult problems to address, at least their cause is well known - the powertrain.
Even Fiat-Chrysler CEO Sergio Marchionne has acknowledged that the powertrain options in the Dart are substandard, admitting at January's Detroit Auto Show that the powertrains are "less than ideal." Leading with the 1.4-liter turbocharged four-cylinder found in the Fiat 500 Abarth left a bad taste in the mouths of consumers thanks to the laggy engine and dead throttle response (to say nothing of the manual and dual-clutch gearboxes that needed more refinement). The addition of the 184-horsepower 2.4-liter Tigershark in the Dart GT has helped matters some, but apparently Auburn Hills doesn't think it's quite enough.
If rumors are to be believed - get that salt ready - a possible solution may be in the works. A report from Allpar is claiming that Dodge is considering fitting a Pentastar V6 into the Dart's engine bay. As the Mopar-obsessed website points out, the critically acclaimed Pentastar is available in three different sizes - 3.0 liters, 3.2 liters and the original 3.6 liters. We don't get the 3.0 here in the US, but the 3.2 can be found in the new Jeep Cherokee and the 3.6 has been seemingly fitted to every model Chrysler can shoehorn it into.