2009 Dodge Charger 4dr Sdn Sxt on 2040-cars

Auto blog

FCA recalls 1.1 million vehicles worldwide due to confusing shifter

Fiat Chrysler is recalling 1.1 million vehicles worldwide to address the problematic shifter used on cars with eight-speed automatic transmissions. The issue is that the console-mounted shifter acts like a rocker switch and always returns to the middle position after moved. This has been deemed confusing to drivers – confusing enough to cause some to exit their vehicles without first selecting Park and leading to the car rolling away. FCA says 41 injuries are related to the shifter problem, and no evidence of equipment failure has been found. The company will enhance warning chimes and alter the shift strategy, meaning alert messages will be displayed in case the driver door is opened while the engine is running. With the door open, the transmission will prevent the car from moving even if Park is not selected. The affected vehicles are certain model-year 2012–2014 Dodge Charger and Chrysler 300 sedans, as well as model-year 2014–2015 Jeep Grand Cherokee SUVs, an estimated 811,586 US vehicles in total. The recall also affects 52,144 vehicles in Canada, 16,805 in Mexico, and 248,667 vehicles elsewhere. The shifter is used with ZF-designed and ZF-built eight-speed automatic; Audi uses a similar shifter setup in some of its vehicles, including the current-generation, which predated Chrysler's use of it. Chrysler uses a different, a rotating-dial-type shifter on eight-speed-equipped Rams. The company moved away from the problem shifter design in 2015 for the Charger and 300, and the Grand Cherokee's shift lever was modified for 2016. Owners of affected vehicles will be notified of the recall when service is available. Fiat Chrysler urges customers to follow the instructions in the vehicle's owner's manual in the meantime. Related Video: News Source: FCAImage Credit: AOL Recalls Chrysler Dodge Jeep RAM Ownership Safety SUV Sedan

Are you the Dodge Dart SRT4?

Dodge has just confirmed that it will be bringing its newest Dart variant, the Dart GT, to Detroit next week, but we're still in the dark about when we'll see a truly hotted-up SRT4 version. But now, by way of the rumormill anyway, we've got at least one proposed, potentially Dodge-based rendering to light our way.
Seen here is what would appear to be a design sketch of the SRT4 Dart. Obviously the image that has surfaced is of rather low-resolution, but there's at least some evidence to support that it may be legitimate. In the original picture, one can just make out the name Tim Doyle in the lower right corner. As it turns out, Tim Doyle's name is also watermarked on the final design image for the 2011 Dodge Durango Citadel Black & Tan, a model that was shown at SEMA in 2010.
Of course, even if this really is the work of Doyle, there's nothing to say that this image isn't one of a great many potential looks for the future SRT4. In fact, the departure of the cross-hair grille from the Dodge's nose seems like it could be a hard sell, though we do, naturally, dig the sleek hood scoop and the bulked up wheel/tire combination.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.