2009 Dodge Challenger R/t Classic, B5 Blue 6 Speed All Options, Only 20k Miles!! on 2040-cars

Auto blog

Dodge Viper recall requires small-handed mechanics

It has been over a year since Chrysler first announced its recall of 3,660 2003-2004 Dodge Vipers because the airbag could suddenly deploy. The repairs are finally beginning, and it appears to be a nightmare for mechanics.
According to the automaker's filing with the National Highway Traffic Safety Administration, the airbag control module can fail, which causes the bag or the seatbelt pre-tensioner to deploy without warning. It took over a year to design the new parts, according to The New York Times. However, Chrysler finally has a new "jumper harness with an in-line diode filter circuit" ready to fix the problem.
The dilemma now moves to the mechanics who have to actually install the part. A 47-step guide from Chrysler explains that the procedure should take about two hours. It's not an easy job, though. Most of the dashboard has to be taken apart, and the instructions include this helpful bit of advice: "Installing the jumper harness and filter box into position is not an easy task. Patience, perseverance, and small hands are required." We wish the best of luck to them. The fix comes just in time for the Vipers to enjoy the summer sun.

2015 Dodge Charger R/T Scat Pack Quick Spin

"Scat Pack" is plucked from The Big Book of Dodge Nameplates to describe what is basically the average of the Charger R/T and Charger SRT 392. Unnecessary horsepower always seems to go down better with a dose of heritage. If you think it's a silly name, just be thankful Dodge didn't call it an S/RT or an R/T-S. In previous years, a similar formulation was known as the SRT8 Super Bee. Going by another name, it's still as sweet and wears the same hurried-looking pollinator on the grille. We do wonder: What has displeased him so, and why does he have wings and wheels? The packaging is at least fresh. All Chargers get updates for 2015, including improved interiors and a Dart-on-steroids exterior redo. The new lines work especially well on the more aggressive models, including this Scat Pack car. Like the Super Bee before it, the Scat Pack gets the 6.4-liter engine from SRT 392; for 2015 it gets a slight output boost to 485 horsepower and 475 pound-feet of torque, respective increases of 15 and 5. It does without the SRT three-mode suspension and comes with cloth seats (leather is an option) to keep the price down. The Scat Pack also has slightly smaller Brembo front brakes, narrower wheels, and different rubber. It does, however, cost eight grand less and is just as quick in a straight line. Intriguing. Driving Notes Scat Pack cars get an electronically controlled active exhaust that we'd call hyperactive. It's loud all the time, opening its widest at startup, idle, and when you ask for any appreciable amount of power. Sport mode supposedly makes a difference, but we couldn't discern loud from louder. It's a delicious and appropriate loudness, with a brassy trumpet tone to it, and the engine makes top-fuel noises at full tilt. The squeal of the rear tires can be heard from every stoplight no matter the road conditions. A light touch avoids leaving a mark if you're so inclined. We weren't. When the tires eventually smear into the realm of traction, this thing is pretty quick – hitting 60 miles per hour takes 4.5 seconds. There's also an adjustable launch control mode if you want to cut out some of the wheelspin. The eight-speed transmission shifts smoothly. Quicker, more-palpable shifts are had in Sport mode, but occasionally the transmission still needs a moment to drop down from seventh or eighth when you mash the throttle. Despite its two overdrive gears, this Charger is still loud on the highway. In a good way. Probably.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.