2006 Dodge Caravan Se Mini Passenger Van 4-door 2.4l on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Dodge Dart Mopar '13 special edition recalled over airbag woes

Dodge is only building 500 examples of the black-and-blue Mopar '13 Dart, but the majority of them are now being recalled. Part of the Mopar upgrade included replacing the stock seat skins in the Dart with black and blue Katzkin leather, but the seat-mounted side airbags were reinstalled improperly during the upfitting process, which could affect the performance of the front seat side airbags.
According to the official National Highway Traffic Safety Administration bulletin, a total of 374 Mopar '13 cars are being recalled due to side airbags that might not deploy in a side-impact collision. There have been no reports of the airbags not going off, but Chrysler will still need to reinstall the bags to ensure proper deployment. The recall notice is posted below, which gives information for Mopar '13 owners to contact Chrysler and NHTSA.

How Dodge dealers are earning the right to sell Hellcats

We all hate the idea of the dreaded dealer markup when it comes to buying a highly anticipated new car. Take the 2015 Dodge Challenger SRT Hellcat, for example. You might spend hours reading about its supercharged V8 and speccing the model just right in the configurator, but when it finally comes down to laying down the cash, the dealer adds thousands of dollars as a "market adjustment" on the muscle machine of your dreams. As it turns out, when the Hellcat starts hitting showrooms in the third quarter, Dodge is trying to make sure that's not the case.
Dealer orders for the much-hyped Hellcat recently started, but Dodge boss Tim Kuniskis has put some special caveats in place to ensure that the Hellcat makes it to the road quickly. The initial allocation is based on the number of Dodge products that a showroom has sold in the last 180 days, and a second allotment in December is based on the last 90 days of sales and 30-day turnover. "You sell a lot of Darts for me, Journeys for me, Durangos for me, I'm going to give you the rights to this one, too, because this is a halo of the brand," said Kuniskis to Automotive News.
Furthermore, how quickly the Hellcat sells is also going to decide whether showrooms get more of them. "If you want to market-adjust the car, that's your right. But if your days-on-lot goes above what the other guys that are selling them at MSRP is, they will end up earning the allocation because their days-on-lot will be lower," he said to Automotive News. Obviously, this doesn't prevent dealers from marking up the Challenger SRT, but the strategy certainly discourages it.