2.4l L4 Sfi Dohc 16v Front Wheel Drive Se Charcoal 4spd Automatic Am Fm Cd Play on 2040-cars

Auto blog

Peugeot's American future looks dead, but Stellantis intends to keep all brands alive

The years-old promise of a Peugeot return in the U.S. is looking bleaker by the second. Peugeot said the French brand would come back to sell cars in the U.S. five years ago, but now that FCA and PSA have transitioned to one Stellantis, that promise is looking a lot shakier. This news comes via a report from Car and Driver. When queried about Peugeot, Carlos Tavares, Stellantic CEO, offered this in response: “For the time being, I don't think that is part of the things that we want to prioritize for the next time window," Tavares said. "I think it's better that we funnel the talent, the capital, and the engineering capability of our Stellantis company to the existing brands to improve what needs to be improved and to accelerate where we need to accelerate, because we already have a very strong presence in this market." Tavares hasnÂ’t ruled it out entirely, but any kind of a Peugeot American renaissance is being pushed onto the backburner.  In good news for American brands, though, Tavares expressed great interest in keeping them all. Chrysler was the most worrisome of the bunch, as it only sells the aging 300 sedan and Pacifica minivan variants. Nevertheless, Tavares sees Chrysler as one of the “three historical pillars of Stellantis” and is eager “to give this brand a future.” Specifically, Tavares sees a high-tech future for the once-great American car company. Motor Trend reported on what Tavares spoke about in a call with the media. "It needs to rebound,” Tavares said. “We could think about what could be the next technologies in the automotive industry.” The obvious hint here is electrification and greater autonomy. Chrysler could theoretically become StellantisÂ’ electric showcase brand. ItÂ’s partway there with the Pacifica Hybrid PHEV minivan, but thereÂ’s still a long way to go for it to become the conglomerate's tech pillar. And then thereÂ’s Dodge and its powerful but emissions-heavy lineup. "We have the technology to deliver the torque, dynamics, and acceleration feeling, while also dramatically reducing the emissions," Tavares said. The Hellcat canÂ’t have a window-shattering 6.2-liter supercharged V8 forever, but it looks like Stellantis is at least committed to keeping the performance of DodgeÂ’s current lineup. Related video:

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

2016 Dodge Viper ACR First Drive [w/video]

The Dodge Viper is not a comfortable car. Livable, yes. The interior is covered in fine materials. But you still climb over a hot door sill to enter the tiny cabin. And the frequency range of the engine's noises seem specifically designed to cause headaches. What happens, then, if you remove all pretense of civility from a Viper and add equipment solely aimed at improving lap times? You would have the 2016 Dodge Viper ACR. In terms of achieving its purpose, this car is a absolute success. In many ways it's also the most honest Viper of the current generation. Prices start at $121,990 (including $2,100 gas-guzzler tax and $1,995 destination), or $32,900 more than the least expensive Viper. In ACR trim, the Viper loses the under-carpet padding, 9 of 12 speakers plus amplifier, carpet and trim from the cargo area, and sound deadening in front of the rear wheel wells. The parts of the interior still covered add healthy amounts of Alcantara or optional carbon fiber. That weight loss is compensated by the addition of go-fast bits like the giant rear wing (or the larger "x-wing" on the Extreme Aero Package), 10-way adjustable Bilstein Motorsports shocks, Brembo carbon-ceramic brakes, a rear diffuser, and a front splitter. Total claimed curb weight is 3,392 pounds in Aero trim (standard ACR trim is 18 pounds lighter), which is within a few stone of the rest of the Viper lineup. The diffuser strakes and leading edge of the splitter are removable, made to be replaced after rubbing on track tarmac and make street driving slightly more practical. Not that you'd want to drive the ACR on the street, with the lack of noise insulation and spring rates twice as stiff as the Viper TA, but it is street-legal. Dodge claims the DOT-approved Kumho Ecsta V720 tires on the ACR allow faster lap times than some race compound tires. Our test was limited to on-track shenanigans at Virginia International Raceway. Which is fitting because we wouldn't have anything good to say about driving the car on the street. The ACR is, essentially, a race car sold in the showroom, although with the Viper's 1 of 1 customization program, your custom build can include as many creature comforts as you like. Lined up in pit lane at VIR, the Viper ACRs for our evaluation blur the air with heat shimmer. All of the test cars have air conditioning, but that shuts off at full throttle with a six-second reset.