2014 Dodge Viper Srt Gts Navigation Satellite on 2040-cars

Auto blog

Chrysler recalls 350k vehicles over ignition switches

Chrysler has announced a recall covering 349,442 vehicles due to ignition switches that can either become stuck or move without warning. All of the affected vehicles are from the 2008 model year, and were built before May 12, 2008.
The automaker has learned that ignition keys on some vehicles "may not fully return to the 'ON' position after rotation to the 'START' position during engine-startup," the company said in a statement. Additionally, "an ignition key may not fully return to the 'ON' position after rotation to the 'START' position and may inadvertently move through the 'ON' position to 'ACCESSORY' or 'OFF.'"
Chrysler says it is unaware of any related injuries, and notes that while reduced braking, engine or steering power is possible in such instances, the airbags are not affected. The later stands in contrast to General Motors' recent rash of high-profile recalls, and it's an important distinction that Chrysler (understandably) felt necessary to call out in bold print in its press release.

Chrysler Recalling 870,000 SUVs For Brake Defect

Chrysler is recalling nearly 870,000 SUVs because corrosion may make the vehicles' brakes harder to use. Jeep Grand Cherokee and Dodge Durango SUVs from the 2011 through 2014 model years are involved. Chrysler says crimp joints in the brake boosters can corrode if they're exposed to water. If the water freezes, the boosters won't aid braking as they usually do. Chrysler began investigating after some customers said their brakes felt too firm when pressed down. The company knows of one accident, but no injuries, due to the defect. Dealers will install a shield to protect the boosters for free and replace boosters that aren't working properly. Chrysler has since changed the design to make the boosters more corrosion resistant. Chrysler will notify owners of the recall, which involves 867,795 vehicles. Related Gallery Safest Crossovers For The Budget-Conscious Family View 10 Photos Recalls Chrysler Dodge

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.