1983 Dodge Ram Van B250 on 2040-cars

Auto blog

Dodge recalling 2k SRT Hellcat Challengers and Chargers for fuel leak

Bad news for fans of the obscene output of the Dodge Hellcat twins, as FCA has announced a voluntary recall of both 707-horsepower variants of the 2015-model-year Charger sedan and Challenger coupe. According to FCA, a total of 2,211 cars are being recalled after a dealer discovered a "possible fuel leak" during a pre-delivery inspection. Despite getting cleared by suppliers, FCA claims its engineers found "improperly installed" hose seals. Owners of affected vehicles will receive notification and be asked to report in for repairs. Of the vehicles affected, the overwhelming majority, 2,012, were sold in the US market. The remainder were sold in Canada (148), Mexico (30) and just 21 outside of North America. Scroll down for the official release from FCA. Related Video: Statement: Hose Seals March 1, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 2,211 cars globally to replace fuel-delivery components that may leak. An FCA US dealer alerted the Company to a possible fuel leak following a pre-delivery vehicle inspection. These components had passed the supplier's leak-testing, but FCA US engineers launched an investigation and discovered certain hose seals may have been improperly installed. The Company is unaware of any related injuries, accidents or customer complaints. Affected are model-year 2015 Dodge Challenger SRT coupes and Dodge Charger SRT sedans equipped with 6.2-liter V-8 engines. There are an estimated 2,012 in the U.S.; 148 in Canada; 30 in Mexico and 21 outside the NAFTA region. Affected customers will be notified and advised when they may schedule service. Customers with questions or concerns may call the FCA US Customer Information Center at 1-800-853-1403.

How to update and secure a vulnerable Chrysler Uconnect system

If you own one of the 1.4 million vehicles affected by the recent Chrysler software recall, you may want to watch this video. In it, we explain how to get the latest infotainment software loaded onto the 8.4-inch Uconnect system. The recall was a response to the findings of researchers who were able to hack into and remotely control a 2014 Jeep Cherokee through its cellular connection. Although Fiat Chrysler has worked with Sprint to plug most of the holes on the carrier side, there are still some vulnerabilities that only this latest software version can patch. Owners have three options to get the update: download it now, wait for a USB stick in the mail, or take the vehicle to an FCA dealer. Chrysler will be sending USB sticks loaded with the software update to customers. Anyone with an internet connection and a USB stick of their own with at least 4 GB capacity can speed things up by downloading the patch from the Uconnect website. We cover that process from start to finish in the video, with the final portion still applicable to those using the FCA-supplied USB stick. If after watching this you still don't want to tackle the patch yourself, you can take your vehicle to the dealer to have it done. Also note that this process is the same for all Uconnect updates, not just the one patching the exploits. Our demonstrator vehicle is a 2015 Ram 1500 pickup. The procedure should be very similar on other products with the 8.4-inch Uconnect system, with only the location of the USB port varying. Once you have the USB stick with the software on it – either after having downloaded it yourself or receiving it in the mail from Chrysler – the installation process is relatively simple. It takes about 15 minutes to perform the update; we edited out the wait in the video. To check whether or not your car's 8.4-inch Uconnect system is running the latest software, go to System Information on the touch screen's Settings page and look at Software Version. The update related to the recall is version 15.17.5. Related Video: Recalls Chrysler Dodge Jeep RAM Safety Technology Infotainment Videos Original Video hacking

Dodge Viper to out-Hell the Hellcat with supercharged V10?

The Viper wouldn't be the Viper if it wasn't the most powerful model under the Chrysler umbrella. But with the arrival of the Hellcat engine in the Dodge Charger and Challenger, the Viper has fallen behind in the bragging rights department: where the new supercharged V8 produces 707 horsepower and 650 pound-feet of torque, the naturally aspirated V10 offers "only" 640 hp and 600 lb-ft - gargantuan output figures by almost any other standard, but crucially behind on the SRT power scale. Conner Avenue is going to have to do something about that.
Although the Hellcat's engine reportedly won't fit under the Viper's hood, SRT is now rumored to have another trick up its sleeve: supercharge the existing V10. According to the Pentastar performance enthusiasts at allpar.com, Chrysler has already taken delivery of the first such prototype engines so that it can begin the process of fitting it into an upgraded Viper.
The spooled ten-pot is tipped to produce around 800 hp and 650 lb-ft of torque. More than that and the Viper's drivetrain, chassis and bodywork would have to be substantially reworked. Though beefier transmissions are available, fitting them would reportedly set off a domino-game of changes required to handle the added torque. Which may be something Chrysler would be prepared to do for the next-generation model, but in the meantime, 800 hp could prove enough to put the Viper back atop the Mopar performance ladder where it belongs, and give it an edge against the new Corvette Z06 to rekindle sales.