Quad Cab Dually Slt Laramie 4x4 Cummins Diesel 6 Speed Manual Low Miles Clean on 2040-cars

Auto blog

2015 Dodge Challenger SRT 392

I've just started reading the third installment in a planned five-book biography of Lyndon Baines Johnson, Master of the Senate, written by the incomparable Robert Caro. Conveniently, a recent trip to drive the BMW X6 M and 228i Convertible was to be staged in Austin, TX, within easy driving distance of LBJ's birthplace, Johnson City. And yes, the city is named for his family. Having completed my duties with the Bimmers, I borrowed the spangled 2015 Dodge Challenger SRT 392 you see above, to squire me around the Texas capitol for a weekend, and as a lift out to the Hill Country homestead of our 36th President. Johnson City isn't exactly a road trip mecca, but there's a pretty good brewery, a museum, the reconstructed LBJ house to take snapshots of, and it's a nice drive to get out there if you've got a 485-horsepower muscle car at your disposal. Driving Notes With the heroic Hellcat, this 392 and the R/T Scat Pack (that Brandon Turkus reviewed recently), there are more SRT-treated Challengers to choose from than ever before. There are 707 obvious reasons that the Hellkitty is the top dog (as it were), but there are important difference between this 392 and the Scat Pack, too. Both cars make use of the 6.4-liter Hemi V8 putting out 485 horsepower and 475 pound-feet of torque, but the 392 also gets an adaptive suspension, six-piston Brembo brake calipers (instead of four-piston), wider tires, leather and Alcantara seats, a heated steering wheel, a louder stereo and HID headlights. When LBJ was campaigning for his seat in the House of Representatives, he would've loved to have something as potent as this monster of a V8 under the hood of his canvassing car. The 6.4L snorts with authority before it sends the big coupe forward to just about any speed I'd ask of it, and with a quickness. Johnson was known for haranguing drivers to step on it, when all that stood between himself and a few more votes was the ability to fit one more stump speech into the day. The 392 feels as though it could cover a quarter of the state of Texas in a morning if you throttle down deep enough (faster even than the Johnson City Windmill, I'd guess). Though there's a six-speed manual available, I'm actually quite fond of the eight-speed automatic in the 392. The two-pedal setup better suits the fast-cruiser attitude of the car, and it never served up any poorly conceived shift logic when I left it in D. Of course, the roads are better now than they were in the 1930s and 40s, too.

Dodge Challenger spied exercising supercharged Hellcat Hemi V8

One of the prime complaints against the Dodge Challenger is that, even in SRT8 guise, its 470 horsepower is responsible for hauling over 4,200 pounds of vehicle. For comparison, the 420 hp in the Ford Mustang GT only has to deal with 3,618 lbs. Things only get worse from there, as the higher-performance variants of both the Mustang and the Chevrolet Camaro are far more powerful than an SRT8 without adding on much heft.
So what is Chrysler to do? The correct answer is add a whole lot more grunt to its hefty two-door and even the odds. That's where the all-new Hellcat engine comes into play. We reported on this engine in May, and suggested that the Hellcat, a supercharged powerplant based on a 6.4-liter V8, would easily generate 500 to 570 hp and could likely arrive boasting more than 600 ponies.
Chrysler's ace in its sleeve has now been spied testing, with a number of Hellcat-equipped Challengers running the potent new engine both in more urbanized areas and under the sun of Death Valley. The hoods on these testers have been raised to accommodate the engine, and that camouflage over the fascias of these prototypes is there to hide a larger air intake. We also note what appears to be a new split grille under wraps. As for power output, our spies are now suggesting a Viper-equalling 640 hp from the Hellcat-equipped cars.

Dodge Scat Pack for 5.7L Hemi V8 detailed, priced

Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.