Dodge Ram Quad Cab 3500 5.9 Diesel Laramie 3500 on 2040-cars

Auto blog

NHTSA investigates a million-plus Jeep Cherokees for parking brake issue

The National Highway Transportation Safety Administration (NHTSA) is investigating a potential safety issue that could be present in more than 1 million Jeep Cherokees sold for the 2014-2020 model years. Per owner complaints, these cars may be equipped with an electronic parking brake control module that is susceptible to water intrusion. If the water causes a short, it can result in uncommanded activation of the parking brake while the vehicle is in motion, which can lead to a stall, NHTSA says.  If you follow Jeep Cherokee news closely (and who doesn't?), this issue may ring a bell. That's because Jeep was on the hook for recalling the Cherokee for water intrusion into the liftgate control module, which is fitted right next to the parking brake module. In that instance, short circuits had the potential to cause a fire, which has not so far been indicated as a potential side effect of the new parking brake issue, but any time electricity is involved, there's usually at least some risk for ignition.  The Cherokee is just one of four Stellantis models with a new open investigation, the Detroit Free Press reported Tuesday. NHTSA is also looking into reports of a transmission problem that could strand owners of 2019-2021 Chrysler Pacifica plug-in hybrid minivans and a crankshaft and/or camshaft position sensor problem that could cause a stall in the 2016 Dodge Journey and Jeep Compass. Between the two, these investigations cover an additional 300,000 vehicles.  None of these vehicles are being recalled at this point, however a NHTSA investigation is the first major step toward a recall being initiated. The regulator will work with Stellantis to determine whether a recall is necessary.  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Government/Legal Chrysler Dodge Jeep Ownership Safety SUV

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

Chrysler recalling 278,222 trucks and SUVs over bad rear axles

Chrysler has issued a recall of 278,222 light trucks and sport utility vehicles here in the United States. The reason: bad rear axles. Specifically, according to the National Highway Traffic Safety Administration, the rear axle pinion nut may lack a necessary adhesive patch, which could cause the nut to loosen. If this happens, the axle can lock up, which could cause all sorts of havoc on the road.
This is an expansion of the rear axle recall announced in October of last year, where 44,300 Ram 1500 and Dodge Dakota models were being called in. At that time, 12 accidents had been reported due to the faulty axle pinion nut.
Affected vehicles include Ram 1500 trucks from the 2009 to 2012 model years, Dodge Dakota models from the 2009 to 2011 model years, and both the Chrysler Aspen and Dodge Durango SUV twins, both from the 2009 model year only.