2005 Dodge Ram 3500 Laramie on 2040-cars

Auto blog

Dodge Hellcats getting price hike

Dodge plans twice as many Hellcats on the road for the 2016 model year, they are going to be a bit more expensive when buyers sign on the dotted line. According to CarsDirect and confirmed to Autoblog by Dodge, 2016 Challenger SRT Hellcat costs $65,190, an increase of $4,200 over 2015. That figure includes $995 for destination and $1,700 for the Gas Guzzler charge. The latest Charger SRT Hellcat retails for $68,640, a $3,650 increase. Other SRT trims of the muscle cars also see a price hike. The 2016 Challenger SRT 392 is $51,190, after destination and a $1,000 guzzler charger – a $3,500 increase. The Charger SRT 392 also jumps $3,000, to $51,990. Even at 2015's prices, Dodge was having problems keeping up with demand for the Hellcat, and the higher price isn't likely to change that. And before you think the company is going plum crazy, the 2016 models of all four muscle cars come standard with Laguna leather seats and navigation. According to company spokesperson Dan Reid to Autoblog, both items had a "very high customer take rate," and the previously optional features are valued at $2,490. Dodge previously announced a discount for those who had a sold 2015 Hellcat order canceled in the switch to 2016. Those amount to $5,000 on the Challenger and $4,000 Charger, which seems like a sweet deal for those customers. Related Video:

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Dodge Viper might not live past 2017

The Dodge Viper might be running out of venom because the muscle-bound sports car could be on the road to being cancelled in just a few years. According to Allpar, the proposed deal between the United Auto Workers and FCA US would close the Connor Avenue Assembly plant, which produces the Viper, in 2017. The proposed union contract doesn't give a reason for closing the factory, but the decision is understandable if frustrating. The plant was idled twice last year to reduce production of the Viper to match flagging demand. A $15,000 price cut for the coupe eventually allowed for a sales surge, but that appetite hasn't continued in 2015. From January through September of this year, the company has only moved 503 of the sports cars, down eight percent. To further spur demand, Dodge has employed a few other tactics like the 1 of 1 program for buyers to personalize their Vipers, and the introduction of the brutally track-focused ACR. In a world where high-end sports cars are continuing to get friendlier for both their drivers and the environment, the Viper remains a holdout with a big, naturally aspirated V10. Even with the addition of some electronic aids on the latest Vipers, the snake still demands respect from those behind the wheel. Respect is fine, but sales are what matter to FCA – and the harsh reality is that a lack thereof might force the Viper into retirement, whether we like it or not.