Diesel Truck 6.7l Cd 6 Speakers Am/fm/mp3 Stereo We Finance & Accept Trade-ins on 2040-cars

Auto blog

NHTSA investigating 110,000 Ram 2500s and 3500s, one death alleged

The National Highway Traffic Safety Administration has launched an investigation focusing on 110,000 Dodge Ram 2500 and 3500 pickups from model years 2004 to 2006. One death has already been reported, according to NHTSA, due to a potential fault with the clutch interlocks on manual-transmission versions of the heavy duty pickup.
According to the report, these trucks can be started without depressing the clutch. There have been three reports so far, and as we mentioned above, one very sad incident seems to have resulted in the death of a child.
"One complaint involved an incident that occurred when a child was able to enter the vehicle and start the ignition without depressing the clutch. The vehicle then moved forward striking another child resulting in a fatality," NHTSA said in the investigation bulletin, which you can view below.

Chrysler minivans under investigation for stalling after fuel refill

According to the National Highway Traffic Safety Administration, at least one man has reported that his 2007 Dodge Grand Caravan stalled unexpectedly on the highway shortly after being refueled. The unidentified man who contacted NHTSA regarding the issue cited as many as eight similar instances reported by other drivers.
NHTSA has announced that it will launch an inquiry into this issue, which could affect as many as 160,000 minivans from Dodge and Chrysler that were sold in 2007 (or more, if a problem is found that extends to additional models years, we'd assume). As of yet, there's no formal investigation, let alone a recall, on these vans, as the agency is merely determining if further action is needed.
Two months ago, Chrysler recalled nearly 700,000 vehicles, the majority of which were minivans, from the 2008-2010 model years to replace ignition switches after an investigation found that their weak springs and detent positions could fool a driver into thinking the car was in the "Run" position, when it's actually in the "Accessory" position.

Dodge idles Viper production again at Conner Avenue

You've got to hand it to Dodge for having the gumption to put the original Viper into production in the first place. It was, after all, much more of an emotional decision than a practical one, and a move which saw the first production V10 engine placed in a road car - long before the advent of the Lamborghini Gallardo, Audi R8, Porsche Carrera GT or Lexus LFA, not to mention the other Ford, BMW and Volkswagen Group models that used such engines.
It's now been 22 years since the first Viper entered production and the Viper still rolls on several generations later, but we're sad to say that courageous decision has not always been met with overwhelming sales success. In fact parent Chrysler was forced to idle the Conner Avenue plant where the Viper is made back in April due to slow sales. And while production resumed again as planned on June 23, it apparently didn't do the trick.
As a result, Chrysler corporate communications chief Shawn Morgan revealed to Autoblog that the assembly line has been shut down again for another two weeks. The line was up and running for nearly two full work weeks from June 23 until the holiday weekend that started on Thursday, July 3. But instead of coming back online today as planned, it's been idled again for the weeks of July 7 and 14. That means it will be July 21, at the earliest, before the serpentine supercars start slithering down the assembly line at Conner Avenue again. Once it does, however, production is set to resume at the same pace it was before the shutdown.