1998 Dodge Ram 2500 Laramie Slt 4dr 4wd Extended Cab Lb on 2040-cars

Auto blog

That thing got a Hemi? Mopar engine kits make it easier to say yes

Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016

Dodge Charger Hellcat makes 1,032 hp with Hennessey help

Sometimes you just want four doors. Earlier this week we brought you Hennessey's riff on the Dodge Challenger Hellcat. Now comes the Charger. Much like its two-door sibling, the Charger gets boosted to as much as 1,032 hp and 987 lb-ft of torque (at the crank) thanks to the addition of a twin-turbocharging setup that works with the factory supercharger. The turbo headers and downpipes are stainless steel, and there is a high-flow air-to-water intercooler and dual-turbo waste gates. Hennessey also beefs up the fuel injectors, fuel pump, and the rest of the fuel system. The engine management system and chassis are recalibrated to accommodate all of this. You also get numbered plaques signed by John Hennessey, the boss of the Texas tuning outfit, and the technician who does your build. Hennessey's additions result in zero-to-60 mph sprints in 2.7 seconds, and the big sedan can run the quarter mile in 9.9 seconds at 142 mph. Like the Challenger, the Charger has the same disclaimer: the lofty horsepower figure comes from an engine dyno, and it will be a 15-to 20-percent lower at the rear wheels. Related Video: Image Credit: Hennessey Performance Dodge Performance Sedan Hennessey dodge charger hellcat

Weekly Recap: FCA hit with record fine as NHTSA crackdown continues

The National Highway Traffic Safety Administration slapped Fiat Chrysler Automobiles with a record fine this week that could reach $105 million. The punishment comes after NHTSA found problems with the automaker's execution of 23 recalls that affect more than 11 million vehicles. The consent agreement, announced Sunday, calls for FCA to pay a $70-million cash fine and requires the company to spend at least $20 million over a three-year period on industry outreach programs and to beef up old recall campaigns. Failure to comply will result in another $15-million fine. FCA also agreed to federal oversight, which includes an independent monitor to oversee the company's recalls. The $70-million cash fine equals a penalty NHTSA levied on Honda in January. "Fiat Chrysler's pattern of poor performance put millions of its customers and the driving public at risk," NHTSA administrator Mark Rosekind said in a statement. "This action will provide relief to owners of defective vehicles, will help improve recall performance throughout the auto industry, and gives Fiat Chrysler the opportunity to embrace a proactive safety culture." FCA called the deal a "consensual resolution," but admitted that it "failed to timely provide an effective remedy" during certain recalls. "We are intent on rebuilding our relationship with NHTSA and we embrace the role of public safety advocate," the company said in a statement. The announcement kicked off a busy week for the automaker. NHTSA agreed FCA did not need to recall 4.7 million vehicles after an investigation failed to find defects with a power module used in some Jeep, Dodge, and Ram vehicles. A Georgia judge also reduced a civil verdict involving a death in a Jeep Grand Cherokee crash. Amid all of that, the company reported net profit of about 333 million euros, or $364 million in the second quarter on Thursday. OTHER NEWS & NOTES FCA ramps up Hellcat production Despite a decidedly legal and financial week for FCA, there was still time for the performance side of the business to briefly grab the spotlight. The automaker is more than doubling its production of the Dodge Challenger and Charger SRT Hellcats in response to strong demand. The order bank opens the second week of August and production begins in September. FCA will finish up its scheduled 2015 model-year Hellcat builds, and cancel any "unscheduled" versions, though customers will get discounted pricing for 2016.