1994 Dodge Ram 2500 For Parts (running Engine Transmission) Bent Frame on 2040-cars

Auto blog

Watch this Dodge Viper get clawed to death

There's a scene in the James Bond movie, Casino Royale, where Daniel Craig's Agent 007 is captured by villain Le Chiffre, played by Mads Mikkelsen. Le Chiffre tortures Bond in a scene that is rather difficult to watch (especially for blokes) and impossible to describe on these digital pages (Google at your own risk). This video is the automotive equivalent of the Casino Royale torture scene.
It shows a Dodge Viper - a late, first-generation GTS judging by the center-exit exhausts - getting assaulted by a giant piece of heavy equipment. The large claw shows no mercy on the V10-powered sports car, rending its muscular curves into pieces and then running it over, just for good measure. It's a painful video to watch (and hear!), made worse because we don't know what the Viper did to deserve such a fate. About a third of the way through the video, the cameraman indicates that the man with the claw is a new operator from Chrysler, and it appears there may be some fire damage, but beyond that, we don't have much to go on.
Scroll down for the video but be warned, it isn't for the faint of heart.

NHTSA investigates FCA for SUVs that roll out of Park

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2014 Dodge Durango and 2014-205 Jeep Grand Cherokee after 14 complaints of the SUVs rolling out of Park. An estimated 408,000 of them could be affected, if a recall is necessary. All of the current complaints submitted to NHTSA about the issue concern the Grand Cherokee, and the claims allege that the SUV can roll out of Park whether or not the engine is running. Some folks report that they check the indicator each time because the gear sometimes fails to engage. Among the 14 cases, there are five accounts of crashes and three injuries, including a situation with someone allegedly being rolled over. NHTSA's preliminary evaluations are meant to investigate "the scope, frequency, and safety-related consequence" of a reported problem. They don't necessarily lead to a recall. Related Video: INVESTIGATION Subject : Unattended vehicle rollaway Date Investigation Opened: AUG 20, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15030 Component(s): POWER TRAIN All Products Associated with this Investigation Vehicle Make Model Model Year(s) DODGE DURANGO 2014 JEEP GRAND CHEROKEE 2014-2015 Details Manufacturer: Chrysler (FCA US LLC) SUMMARY: The Office of Defects Investigation (ODI) has received 14 complaints (VOQs) alleging that after being placed in Park the subject vehicles have then rolled away from their parked position. The unintended motion has occurred with both the engine off and the engine running. ODI has also identified EWR field report data related to the alleged defect. The model year 2014 and 2015 Jeep Grand Cherokee vehicles are equipped with an electronic gear selector (shift-by-wire system). The gear selection is made by pressing the shifter-paddle forward or backwards; the shifter does not move along a gate path as with conventional gear selectors. A Preliminary Evaluation has been opened to asses the scope, frequency, and safety-related consequence of the alleged defect. The VOQs associated with the opening of this investigation are: 10733158, 10730952, 10683556, 10679497, 10583366, 10725429, 10715401, 10711893, 10676998, 10668651, 10662619, 10662308, 10605865, and 10567538.

Dodge Hornet supposedly snapped inside Alfa Romeo Tonale factory

It appears that someone in Stellantis' Pomigliano d’Arco Assembly Plant in Italy couldn't keep their cellphone to themselves. Video uploaded to the Alfa Romeo Club Italia Facebook page, then quickly removed, purports to show Dodge's brand-engineered version of the Alfa Romeo Tonale in the same factory where the Alfa will be built. The Dodge is expected to be called the Hornet, and there are a few differences between it and and Alfa Romeo, which is understandable. But if the screenshots on Twitter are accurate, then the Dodge looks a lot closer to the Alfa Romeo than perhaps anyone expected. The front fascia and hood fall in line with Dodge's design language. The Alfa grille is replaced by a narrow, stepped upper grille, and the hood is one of the vented units similar to those available for Dodge's R/T performance trims. And as Mopar Insiders noticed, the silhouette of this car's front end matches a vehicle silhouette Dodge showed during Stellantis' 2021 EV Day.   Inside, the Italian brand's crest in the steering wheel center cap is replaced by Dodge's twin slashes, and the steering wheel has been stripped of the large, curved paddle shifters the Tonale showed on its debut. There's still a start/stop button on the steering wheel, but where the Tonale has a driving mode dial on its dash, this supposed Hornet has another start/stop button. Dodge's push-to-start buttons are usually on the instrument panel, so our guess is that the wheel is a holdover for testing. On the center tunnel, the parking alert buttons and Italian Tricolore flag on the Alfa Romeo are replaced by three different buttons.   We've known Dodge has two electrified vehicles on the way, and the Hornet name has been low-key buzzing for two years. Fiat Chrysler applied to trademark the name in the U.S. in March 2020; at the time, it was thought a vehicle with that name could replace the Journey. In 2021, a July rumor out of Italy was the first whisper of the Hornet name being attached to the Alfa Romeo Tonale. In August, when Stellantis CEO Carlos Tavares said Dodge would get a PHEV in 2024, watchers pegged that model as the Hornet. That hybrid powertrain would show a year after the vehicle's launch, the Hornet anticipated as a 2023 model with the Tonale's turbocharged 2.0-liter four-cylinder. That engine could get the same 256 horsepower and 295 pound-feet of torque as the Tonale, or be boosted to satisfy Dodge's performance credentials.