Hemi 4x4 Nerf Bars Bed Liner Mp3 Sirius Xm Cruise Control Steel Wheels on 2040-cars

Auto blog

The last time Dodge recycled the Demon name, it was for a Miata fighter

We and the rest of the automotive world are eagerly awaiting the reveal of the Dodge Challenger Demon. And why wouldn't we be? It's going to be a Hellcat, but with less weight, bigger fenders, more performance, and more Vin Diesel. This isn't the first time we've been excited about a Demon from Dodge, though. Ten years ago, Dodge had another demonic car, but it was very different from the new one. The Demon of 2007 was a lithe little roadster that looked primed and ready to take on the Miata, as well as the now-departed Solstice and Sky twins. The Demon was just under an inch shorter than the MX-5 and the Solstice, and it packed a 172 horsepower 2.4-liter four-cylinder that fell right between the Miata's 170 and the Solstice's 177 outputs. Dodge's estimated the curb weight, which for a concept is largely theoretical, also slotted between the two cars at 2600 pounds. That was about 150 more than the Mazda, and about 200 less than the Pontiac. The pitch perfect specifications were presented in a crisp two-seat roadster wrapper. In many ways, it looked like a baby Viper, with a menacing crosshair grille, slanted headlights, and fat rear fenders. The Demon's line's were brutally simple and geometric, too. They didn't seem far removed from the first-generation Audi TT. The interior was also plain and simple. The key highlights were a horizontal aluminum accent that ran the width of the dash, echoed by an aluminum-covered center console. The instrument cluster was uncluttered, with just four gauges, and the only controls were some climate knobs, a double-DIN head unit, and a six-speed manual. It turns out that the 2007 Demon didn't drive very well, though. You see, we actually drove this concept back in the day, and like many concepts, it still had a long way to go to be production ready. The gearbox would grind, the ride quality was terrible. However, the interior was roomy, and the engine sounded suitably grumbly, if a bit coarse. At the time, we said Dodge should absolutely build the little roadster. In retrospect, the company probably made the right decision not to invest in the Demon. The small rear drive sports car segment was, and still is, an extremely niche market. It would have been a big investment for little return, something FCA today is trying to avoid. This is all before taking into account the fact that the recession was just around the corner. In the end, we can't be too sad though.

Stellantis will give its brands 10 years to prove they deserve to live

Formed by the merger of PSA Peugeot-Citroen and Fiat-Chrysler Automobiles, Stellantis has 14 brands under its roof, a number that makes it one of the largest groups in the industry. Rumors claimed not every brand would survive, with Chrysler often earmarked to get axed, but the firm said it will give them all a chance to shine. "We're giving each (brand) a chance, giving each a time window of 10 years and giving funding for 10 years to do a core model strategy. The CEOs need to be clear in brand promise, customers, targets, and brand communications," announced Stellantis boss Carlos Tavares during the Financial Times' Future of the Car event. His comments confirm Chrysler fans and dealers don't need to worry about the future — at least not yet. And, against all odds, Lancia enthusiasts can breathe a sigh of relief, too. Former FCA head Sergio Marchionne warned of the brand's demise on several occasions. Alfa Romeo is safe for now, too, as is Vauxhall, which are basically just Opels sold in the United Kingdom with a different badge. The engagement made by Tavares also means Stellantis won't divest any of its brands to raise capital until at least 2031. It's now up to each executive team to make a case for the brand they run, an unusual survival-of-the-fittest strategy in an era when cutting costs is more common than spending cash. Diving into the vast Stellantis parts bin should help even the most troubled brands turn their fortunes around on a relatively tight budget. It seems likely that survive Chrysler will need to look beyond the 300 and the Pacifica/Voyager, the only models in its range, and completely reinvent its image, which is currently nebulous at best. Lancia, once the champion of luxury, performance, and innovation, faces the same challenge. It's not starting quite from scratch, it's relatively popular in its home country of Italy, but it will need to think globally and expand outside of the city car segment to survive. Featured Gallery 2020 Chrysler 300 View 24 Photos Chrysler Dodge Fiat Jeep RAM Citroen Lancia Opel Peugeot Vauxhall

That thing got a Hemi? Mopar engine kits make it easier to say yes

Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016