2008 St Regular Cab 2wd Cruise Control Lifetime Warranty We Finance 49k Miles on 2040-cars

Auto blog

Dodge Charger to slim down and run turbo four in next generation

The current Dodge Charger is getting long in the tooth. It was originally introduced in 2005 as a 2006 model. In car terms, that's an eternity, though it's been refreshed twice. Still, FCA US will keep the LX-generation car going, reportedly facelifting it one last time for 2019. After that, there are some bigger changes in store . Automotive News is reporting that the follower to the current LX Charger will lose almost 500 pounds and will once again offer a turbo four-cylinder. You might remember the front-wheel-drive four-banger Charger of the early '80s. The recharged sedan will be twin-turbo and it's going to use the 300-horsepower four-cylinder engine currently under development for the 2018 Jeep Wrangler, AN says. The target weight for the future car is around 3,500 lbs, while the current car has a curb weight of nearly 4,000 lbs. Look for it to arrive in the early 2020s. The new platform will have a touch of Italian flair instead of the Daimler-Benz flavor embedded deep inside the LX cars. It will be built on an extended version of the 2017 Alfa Romeo Giulia's "Giorgio" platform, according to AN. Dealers were already shown a styling-buck almost a year ago. Related News: Featured Gallery 2015 Dodge Charger R/T View 42 Photos News Source: Automotive NewsImage Credit: AOL Alfa Romeo Dodge Future Vehicles Sedan FCA

Chrysler Recalling Nearly 907,000 Cars, SUVs

Nearly 907,000 Chrysler, Dodge and Jeep SUVs and cars are being recalled for alternators that can fail and heated power mirror wiring that can short and cause minor fires. The recalls, posted Thursday by U.S. safety regulators, push the total number of recalls so far this year 544, totaling a record of more than 52 million vehicles. The largest of Thursday's recalls covers nearly 470,000 Jeep Grand Cherokees, Chrysler 300s, and Dodge Chargers, Challengers and Durangos from the 2011 through 2014 model years. The alternators can fail, causing the 3.6-liter V6 engines to stall unexpectedly. The problem also can cause the electrical system to fail, as well as knock out power-assisted steering, antilock brakes and electronic stability control. It can even cause fire or smoke, according to documents Chrysler filed with the U.S. National Highway Traffic Safety Administration. NHTSA opened an investigation into the problem in July, and Chrysler began its own probe in August. The company analyzed warranty complaints and alternators that had failed. The alternator generates electricity to recharge the battery and run other devices. Chrysler investigators traced the problem to heat fatigue in an alternator diode. Chrysler said it received 322 complaints about the problem, while 55 people complained to NHTSA. The company said it knows of one crash related to the problem, but no injuries or fires. The company will replace the alternators with upgraded versions for free. Owners will be notified in November. The company says customers who see warning lights or suspect a problem should contact their dealers. The recall affects cars and SUVs sold mainly in the U.S. and Canada, but some were sold in Mexico and overseas markets. The second recall covers almost 437,000 Jeep Wranglers from 2011 through 2013. Water can find its way into the heated power mirror wiring harness and cause corrosion. That can cause a short and could cause a minor fire and smoke, as well as cause loss of function of the mirror. The problem was discovered in February after three Wranglers in Canada were damaged. Chrysler says it has 26 complaints about the problem, but it knows of no fires, crashes or injuries. Dealers will move the wiring and install a protective shield to keep water out at no cost to owners, starting in December. Most of the Wranglers are in the U.S., Canada and Mexico, but more than 78,000 were sold overseas.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.