2007 Dodge Ram 1500 Quad Cab 4x4 Slt 20" Wheels 5.7l Hemi Clean Low Reserve No on 2040-cars

Auto blog

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

Are supercars becoming less special?

There's little doubt that we are currently enjoying the golden age of automotive performance. Dozens of different models on sale today make over 500 horsepower, and seven boast output in excess of 700 hp. Not long ago, that kind of capability was exclusive to supercars – vehicles whose rarity, performance focus, and requisite expense made them aspirational objects of desire to us mortals. But more than that, supercars have historically offered a unique driving experience, one which was bespoke to a particular model and could not be replicated elsewhere. But in recent years, even the low-volume players have been forced to find the efficiencies and economies of scale that formerly hadn't been a concern for them, and in turn the concept of the supercar as a unique entity unto itself is fading fast. The blame doesn't fall on one particular manufacturer nor a specific production technique. Instead, it's a confluence of different factors that are chipping away at the distinction of these vehicles. It's not all bad news – Lamborghini's platform sharing with Audi for the Gallardo and the R8 yielded a raging bull that was more reliable and easier to live with on a day-to-day basis, and as a result it went on to become the best-selling Lambo in the company's history. But it also came at the cost of some of the Italian's exclusivity when eerily familiar sights and sounds suddenly became available wearing an Audi badge. Even low-volume players have been forced to find economies of scale. Much of this comes out of necessity, of course. Aston Martin's recent deal with Mercedes-AMG points toward German hardware going under the hood and into the cabin of the upcoming DB11, and it's safe to assume that this was not a decision made lightly by the Brits, as the brand has built a reputation for the bespoke craftsmanship of its vehicles. There's little doubt that the DB11 will be a fine automobile, but the move does jeopardize some of the characteristic "specialness" that Astons are known for. Yet the world is certainly better off with new Aston Martins spliced with DNA from Mercedes-AMG rather than no new Astons at all, and the costs of developing cutting-edge drivetrains and user interfaces is a burden that's becoming increasingly difficult for smaller manufacturers to bear. Even Ferrari is poised to make some dramatic changes in the way it designs cars.

Dodge Scat Pack for 5.7L Hemi V8 detailed, priced

Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.