2004 Dodge Ram 1500 Srt-10 Standard Cab Pickup 2-door 8.3l on 2040-cars

Auto blog

2015 Dodge Charger priced from $27,995, Hellcat from $63,995*

Ladies and gentlemen, let's get the most salient bit of information out of the way right off the bat: $63,995*. That's the amount of money Dodge dealers will be asking for (at the very least, naturally) for a 2015 Charger Hellcat (*plus $995 for destination on all pricing figures). That rather reasonable sum will bring home its buyer a 6.2-liter Hemi V8 engine boasting a supercharger to post such gaudy figures as 707 horsepower and 650 pound-feet of torque, leading to a top speed of 204 miles per hour to go along with an NHRA-certified quarter-mile time of 11.0 seconds.
With that out of the way, the rest of the 2015 Dodge Charger pricing information breaks down as follows: $27,995 will deliver a sedan with a 292-horsepower 3.6-liter Pentastar V6 engine, mated to an eight-speed automatic transmission. Moving up one step of the ladder nets the buyer an SXT model with the same engine, but a nicer chunk of technology and optional equipment for a $2,000 premium. All-wheel drive adds another $3,000. Hemi V8-powered R/T models now boast an eight-speed transmission bolted to the same well-loved 370-horsepower engine as before, for a base price of $32,995.
The SRT 392 model that had hitherto been the top-performing Charger brings with it an asking price of $47,385 while bargain hunters can equip a Charger R/T Scat Pack machine with that same 485-horsepower 6.4-liter Hemi, albeit with somewhat less posh interior bits and pieces, the removal of the 392's adjustable suspension and hi-po wheel and tire package for $39,995.

2016 Dodge Charger Pursuit Vehicle Gets Uconnect 12.1 | Autoblog Minute

Dodge introduces new tech into its 2016 pursuit vehicles that even Jake and Elwood couldn?t outrun. Autoblog's Adam Morath reports on this edition of Autoblog Minute.

Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats

When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.