2004 Dodge Ram 1500 Low Mileage--excellent Condition on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Fiat Chrysler expands Takata airbag recall to 3.3M vehicles

Fiat Chrysler Automobiles is expanding its recall of vehicles equipped with Takata airbags, moving beyond Florida, Hawaii, Puerto Rico and the US Virgin Islands to the greater US, as well as Mexico, Canada and beyond. The affected vehicles, some 3.3 million in total, were built between 2004 and 2007, with many models, including the Dodge Ram 1500, 2500 and 3500, Durango and the Chrysler 300, having been affected by Chrysler's previous recall. Despite the somewhat alarming nature that comes with a recall of this many vehicles, it seems that Chrysler is moving more out of an abundance of caution (and federal pressure) than anything else, saying: "Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles." Owners of affected vehicles will be notified and asked to report to dealers for a free replacement driver's side airbag. Scroll down for the official press release from FCA. Statement: Global Air-Bag Inflator Replacement December 19, 2014 , Auburn Hills, Mich. - FCA US LLC will replace driver's-side air-bag inflators in an estimated 3.3 million older-model vehicles worldwide, in an expansion of an ongoing regional field action. Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles. Outside of Florida, one of the areas covered by the original action, no FCA US vehicle has been linked to an air-bag deployment of the type that has raised public concern. Nevertheless, the Company is replacing the Takata components tied to that concern. FCA US is aware of one related injury involving one of its vehicles, an older-model sedan. It occurred in a southern Florida region marked by persistent, high, absolute humidity – a condition believed to be a contributing factor in the air-bag deployments under investigation.

Dodge celebrates big B-day with 100th Anniversary Editions muscle cars

Being in business for 100 years is a HUGE milestone, so we hope Dodge has more in mind to celebrate its centennial than just a special edition package for the 2014 Charger and Challenger. Called the 100th Anniversary Edition package, this collection of cosmetic enhancements will be available in limited quantities for both cars at a cost of $2,500.
Ordering a Charger or Challenger with the 100th Anniversary Edition package means starting with either a V6-powered SXT Plus or V8-powered R/T Plus model. They can each be ordered in many colors, but only the High-Octane Red Pearl Coat above is an anniversary exclusive. Each car also comes with an anniversary-exclusive set of 20-inch, five-spoke wheels with what Dodge calls "Granite Crystal pockets," a texture that's also mirrored on each car's grille.
Of course, there are commemorative badges galore affixed to the exterior of each car, including "Dodge Est. 1914" fender badges and "100" logos on the center caps of each wheel. The styling theme of each car's interior is a bit more interesting, with Dodge designers trying to evoke "the patina and machinist legacy of John and Horace Dodge," the company's founders. To that end, the leather interior can be had in Molten Red or Foundry Black Nappa, and each features a custom cloud overprint that makes the hide look like a working man's dirty dungarees. Designers also used brass-colored accent stitching on the interior's leather trim pieces, and affixed more "Dodge Est. 1914" badges to the front seat backs and floor mats. We do like the flat-bottomed steering wheel, and the Challenger 100th Anniversary Edition gets exclusive white gauges faces and the Charger black. The "100" on each car's speedometer is also highlighted in red.