2001 Dodge Ram 1500 Offroad Sport-lifted on 2040-cars

Auto blog

Killing the Dart and 200 might lower FCA's fuel economy burden

Killing the Dodge Dart and Chrysler 200 could allow FCA US to take advantage of an intriguing quirk in the next decade's fuel economy regulations. By increasing its ratio of trucks versus cars, the automaker might not need to worry so much about hitting the more stringent efficiency rules. At first thought, it might seem harder for an automaker with a ton of trucks to meet the government's mandated 54.5 mile per gallon corporate average fuel economy for 2025. However, every company doesn't need to hit that lofty figure, according to The Detroit Free Press. The exact target varies by the product mix between trucks and cars. "While passenger car and light truck categories have separate CAFE targets, it's still true that more trucks versus cars in a company lineup means a lower combined CAFE target," Brandon Schoettle, Project Manager Sustainable Worldwide Transportation at the University of Michigan Transportation Research Institute, told Autoblog. "While passenger car and light truck categories have separate CAFE targets, it's still true that more trucks versus cars in a company lineup means a lower combined CAFE target." FCA US' current product blend has 80 percent pickups and CUVs, which means the company stands to benefit from a lower fuel economy target. It might not seem entirely fair environmentally, but this is a great move from a business perspective. The new CAFE rules aren't set in stone, according to The Detroit Free Press, but potentially taking advantage of the regulation is just one more reason to cut the Dart and 200. Modern crossovers also aren't gas guzzlers like older SUVs, which could make it easier to hit the fuel economy target. "Utilities offer practicality and versatility that cars do not, and now, built on car architectures, they do not penalize consumers on fuel economy as they once did," AutoTrader Senior Analyst Michelle Krebs told Autoblog. Schoettle warns that FCA is still making a gamble by killing the small sedans. "Depending on the previous sales volumes and how much these vehicles might have exceeded their specific CAFE targets, it's possible that these cars helped earn CAFE credits for FCA that they could bank for future use," he said. "Future sales breakdowns [car vs.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Dodge Scat Packages add Mopar performance upgrades in three stages

Dodge has revealed what it calls Scat Package Stage Kits that enhance the performance of the Charger and the Challenger equipped with the 5.7-liter V8, and the Dart equipped with the turbocharged 2.4-liter inline four-cylinder engine. The Scat Packs use Mopar performance parts that also can be bought separately. Most of the upgrades increase engine output, but Dodge somehow manages to not specifically mention the power gains associated with each Scat Pack.
The three Scat Packs offered for the V8-powered cars focus on higher power ratings, and each stage comes complete with a unique engine-management calibration to optimize output. Stage one comes with a cold-air intake and a cat-back exhaust; stage two adds a performance camshaft; and stage three really gives you the goods, adding ported polished cylinder heads and performance headers.
For the Dart, the Scat Packs focus on engine, transmission, chassis and brake upgrades. Stage one will net you a cold-air intake, a short-throw shifter and slotted rotors with performance brake pads; stage two adds a cat-back exhaust system and an engine-management calibration to increase output by taking advantage of premium-octane gasoline; and stage three adds 13-inch vented brake discs up front clamped by four-piston calipers, suspension with adjustable springs and struts and performance front and rear antiroll bars.