05 Hemi Dodge Ram 1500 Slt 4x4 Only 69500 Miles on 2040-cars

Auto blog

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

2015 Dodge Charger SRT Hellcat revealed [UPDATE]

Almost immediately after we drove the 2015 Dodge Challenger SRT Hellcat, we began wondering: what's next? Pumping 707 horsepower into the Challenger seemed so crazy - and so intoxicating - we just assumed that Dodge would try that trick again.
Rumors swirled about a Charger Hellcat. Frankly it makes even more sense than the Challenger version. The Charger is a bigger car, and Dodge has never been shy about dropping monster engines under its hood. Hell (cat), we've seen Charger mules running around town that appeared to be the super sedan.
And finally, it's here. The 2015 Dodge Charger SRT Hellcat was revealed today at a preview event near Detroit, and it will be a centerpiece of the Chrysler display this weekend at the Woodward Dream Cruise.

Junkyard Gem: 1963 Dodge Dart two-door sedan

The 1963-1966 Dodge Dart, sibling to the Plymouth Valiant, was sturdy, cheap, and easy to drive, and it sold very well. Here's a worn-but-solid example of the two-door '63 Dart sedan, spotted in a Denver-area self-service wrecking yard. The only transmission choices for the Dart this year were a three-speed manual and an automatic controlled by Chrysler's famous dash-mounted pushbutton shifter. These shifters worked surprisingly well, even when used for road racing. Starting in the 1964 model year, the Dart could be purchased with a 273-cubic-inch V8 engine, but in 1963 Dart buyers had but two engine choices: a slant-6 displacing 170 cubic inches and good for 101 horsepower and a slant-6 displacing 225 cubic inches and making 145 horsepower. This car has the big engine. This is one of the most reliable engines to come out of Detroit, period. The interior is pretty beat, but the metal isn't rusty. You'd think that someone would have rescued this car long before it came to this sorry end, but perhaps Dart restorers only want numbers-matching V8 cars these days. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. "The new kind of compact in the large economy size."