1941 Dodge Power Wagon 4x4 Military Truck Ww2 Classic Antique on 2040-cars

Auto blog

Towing with the 2016 Ram lineup [w/video]

I do not tow things. Ever. Yet I recently found myself at the Fiat Chrysler Automobiles proving grounds in Chelsea, MI, where I'd be testing the hauling capabilities of Ram's current product range. This experience was not only a perfect education for a towing novice like me, but allowed me to tow far more weight than I'd ever consider hauling the real world, and all within the safe confines of the Chelsea Proving Grounds. There was an extremely diverse array of vehicles at my disposal, including Ram's gasoline- and diesel-powered offerings with trucks ranging from the 1500 on up through the 5500 Chassis Cab, as well ProMaster vans. Beyond that, FCA brought out a number of vintage Dodge pickups for me to play with, while also working with Case IH to provide a track-loader I could test. I put together a range of videos covering everything from the classics to the production trucks to the construction equipment. And despite some technical difficulties – you'll notice a distinct lack of in-car videos, with blame going to a corrupted micro SD card – I've assembled ten videos that give an up-close look at Ram's offerings. 2015 Ram ProMaster City Let's start small. The ProMaster City only has a towing capacity of 2,000 pounds. That's a reasonably impressive figure for a van that uses the same powertrain as a Chrysler 200. The 2.4-liter four-cylinder and nine-speed automatic weren't really bothered with the extra weight added by the trailer. Even when accelerating at freeway speeds, the ProMaster City didn't feel out of breath or hampered by its load. That said, the rear of the van was unloaded, which probably wouldn't be the case for most consumers. It's unclear how the City would feel if its driver were taking advantage of the max payload (1,883 pounds) and towing. 2015 Ram ProMaster 1500 To be polite, the Ram ProMaster is a difficult vehicle to like. Its awkward seating position is bus-like and lacks the visibility enjoyed by the Ford Transit or the utter driving comfort of the Mercedes-Benz Sprinter. Its 3.0-liter, four-cylinder turbodiesel engine, meanwhile, is something of an anomaly. While it's potent for a four-cylinder diesel, producing 295 pound-feet of torque and 174 horsepower, those numbers don't feel all that impressive when loaded down. The model I tested was barely using half of its 5,100-pound maximum towing weight and was loaded down with just 500 of its 3,620-pound payload. Yet it lacked the pluckiness of the smaller City.

Dodge Challenger SRT Hellcat vs. Chevrolet Camaro ZL1 in latest Head 2 Head

"Olympian" is one of the terms we use to signify the greatest height, the seat of the gods. Yet Mt. Olympus is the second-highest peak in the Balkans ranges, overshadowed by the crest at Musala in Bulgaria's Rila mountains. Both great heights, but one is a little higher. That's how we get the Olympian Chevy Camaro ZL1 pitched at the Musalic Dodge Challenger SRT Hellcat in Motor Trend's latest episode of Head 2 Head. The side-by-side spec sheet is filled with farcical numbers. For the ZL1, that's a 6.2-liter V8 with 580 horsepower, 556 pound-feet of torque, a 4,051-pound curb weight, 0-to-60 miles per hour in 3.9 seconds, a quarter-mile time of 12.2 seconds and a base price of just $57,800. Opposing that, the Hellcat wrings out its 6.2-liter V8 for 707 hp, 650 lb-ft of torque, weighs 4,449 pounds, does the quarter in 11.7 seconds and has a base price of just $60,990. Except in the case of the Hellcat, when Motor Trend put it on the dyno the machine spit out a reading of 672 hp and 606 lb-ft at the wheels. If there's a 10-percent driveline loss through those beefed-up internals and heavy-duty eight-speed transmission, that means the Hellcat is actually rated at about 750 horsepower and 700 lb-ft. But once they get put on a closed-off strip of coast road in Northern California, there are only a few strands of hair between their respective performances. That's not the case for they sensations provide; host Jonny Lieberman calls one of them, "One of the most incredible cars ever made," and says, "It changes everything." Watch the video above to see who got the verdict and how. Related Video:

GTC deliveries take Rauh collection up to 79 Vipers [w/video]

How many Vipers is enough? One of the ten-cylinder supercars might be too much machine for most drivers to handle, but not for Wayne and D'Ann Rauh. The Texas couple already own 77 of Dodge's flagship model. And now they've taken delivery of two more. At the Conner Avenue Assembly Plant in Detroit on Friday, the Rauhs received the keys to a pair of Dodge Viper GTCs, customized through the automaker's "1 of 1" customization program. The program allows owners to spec their Viper just the way they want it, with 50 million unique combinations. For their 78th and 79th additions, the Rauhs ordered one decked out in brown with black stripes for Wayne, the other in purple with white for D'Ann, to whom the majority of the collection belongs. Of course, both come equipped with an 8.4-liter V10 driving 645 horsepower and 600 pound-feet of torque to the rear wheels through a six-speed manual transmission. The couple will add the pair to their collection in Arp, TX, a town on the outskirts of Tyler, located between Dallas and Shreveport. The Rauh's garage already includes the last of the previous-generation Vipers decked out in two-tone gold finish. eGarage profiled the couple two years ago when their collection numbered "only" 65, and we have no doubt that number will only continue to grow as long as Dodge keeps building the legendary super-snake. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Texas Dodge Viper Enthusiasts Receive Keys to Two New Customized '1 of 1' Dodge Viper GTC Models, Now Owners of 79 Vipers Total July 24, 2015 , Detroit - Dodge Viper owners Wayne and D'Ann Rauh elevate Viper Nation enthusiasm to a whole new level. On Friday, July 24, the couple visited the Conner Avenue Assembly Plant in Detroit to receive keys to not one, but two new customized "1 of 1" Dodge Viper GTC models, making them proud owners of a total of 79 Dodge Vipers. Through the new Viper "1 of 1" customization program, owners can create their very own one-of-a-kind Snake. No two customers can order the same configuration, including color, in the same model year. With the introduction of matte-finish exterior paint, the 2016 Viper is now offered in more than 50 million unique build configurations, made up from the more than 16,000 unique paint color options and more than 48,000 unique stripe combinations.