1964 Dodge Polara Gasser on 2040-cars

Auto blog

Will airbags sandbag the 2017 Dodge Viper?

The Dodge Viper is speeding down the road to cancellation for the 2017 model year, and at least part of the reason for the V10 monster's death is a problem fitting it with federally mandated side curtain airbags. An anonymous source close to FCA US told Motor Trend the automaker can't install the parts because they would further limit the coupe's already tight headroom. The government believes the side curtain airbags can reduce occupant ejections during accidents, and all vehicles must have them for the 2017 model year. The Viper's slow sales also don't provide FCA US much motivation to work out a solution to this problem. The automaker moved just 676 of the handmade sports coupes in the US in 2015, which was down 11 percent from 760 deliveries in 2014. FCA CEO Sergio Marchionne hinted at the Detroit Auto Show that the Viper could return eventually. He doesn't like that the current model has a dedicated platform but indicated a new one could share the underpinnings with another of the company's products. Marchionne's current business plan for FCA stresses building the automaker's value, so it might be a while before we see the sweater-clad CEO focusing on a niche vehicle like the Viper. Related Video:

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

2016 Dodge Charger Pursuit Vehicle Gets Uconnect 12.1 | Autoblog Minute

Dodge introduces new tech into its 2016 pursuit vehicles that even Jake and Elwood couldn?t outrun. Autoblog's Adam Morath reports on this edition of Autoblog Minute.