1988 Dodge Ram 250 3/4 Ton Solid Heavy Duty Truck! on 2040-cars

Auto blog

Get a peek at the Dodge Demon in the new Fate of the Furious trailer

Will all of the news that comes out, Thursdays should now be referred to as Demon Days (no relation to the 2005 album by Gorillaz), at least until April. In addition to this morning's news on the Dodge Demon's Launch Assist and beefed-up components, the automaker released a trailer/commercial for The Fate of the Furious that shows a Dodge barrage and a few quick looks at the new car. The film, which opens days after the Demon's debut at the 2017 New York International Auto Show, is packed full of Dodge, SRT, and FCA products. While the few cars shown in the garage look superficially like Demons, they appear to just be standard Hellcats – the hood is wrong, and they are missing the fender flares. On the other hand, the ones in the trailer's chase scene appear to be the real deal, or at least made to look like it, with the big AirGrabber hood scoop and wide-body fender flares. We've seen a few of these cars already on the film's set, so this is no real surprise. The ad itself is a bit strange. The shots of the woman standing in front of the SRT lineup appear to be cut into footage from the film, so she's not actually talking to the cast in these scenes. That's why a narrow-body car bursts through the wall and becomes a wide-body Demon-like thing. Well, the Fast and Furious franchise was built on bad dialog and over the top car stunts, so par for the course? The film debuts on April 14, and expect the Demon around that time, too. Related Video: News Source: Dodge/YouTube TV/Movies Dodge Performance dodge demon dodge hellcat the fate of the furious

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Dodge Viper ACR reportedly green lit [w/video]

The Dodge Viper might be getting a little more venomous in the near future thanks to a return of the performance-honed ACR trim. According to an anonymous source leaking the info to Allpar, the version would go into production in July as a 2016 model year vehicle. FCA US showed a concept for a future ACR (pictured above) at the 2014 SEMA Show that sported carbon fiber parts for the front splitter and dive planes, plus a picnic-table-sized rear wing. The body also received ducts at the rear to shoot cool air to the differential. A set of 15.4-inch carbon-ceramic brake rotors also brought things to a halt in a hurry. The company promised all the aero pieces were sculpted in the wind tunnel to give the coupe even more downforce. To shed weight, engineers chucked the radio, speakers, carpet and sound deadening out of the interior, and they replaced many bits with even more carbon fiber. All of the tweaks are necessary because the ACR moniker carries serious cachet for the Viper at the track, especially at the Nurburgring. One reportedly did a 7:22 lap around the 'Ring in 2008, and another improved that further to 7:12 in 2011. Autoblog reached out to FCA US for comment about the possibility for the hotter Viper, but the company wasn't willing to comment about any possible, future projects. Related Video: