1975 Dodge D150 Short Wide Box Factory Big Block 440 Truck With Original 440 on 2040-cars
Vancouver, Washington, United States
Body Type:Pickup Truck
Engine:440
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
Make: Dodge
Model: Other Pickups
Cab Type (For Trucks Only): Regular Cab
Trim: D150
Warranty: Vehicle does NOT have an existing warranty
Drive Type: RWD
Mileage: 10,000
Number of Cylinders: 8
This is an original 1975 Dodge 440 Short Wide Box two wheel drive truck. The motor and trans has been rebuilt. The motor is the original motor for the truck and has been bored .030 over with 8 to 1 forged pistons. I had planned on putting a supercharger on it but have not made it that far. The front was already lowered before I got it and they just cut the springs. Still drives good but needs to be done right. I put a B-body 8 3/4 3.55 posi in the rear on top of the leaf springs so I could get the 10 inch wheels under the wheel wells. Had to cut out wheel wells in the truck bed for clearance. Planned on finding a junk box for the wheel wells and have them welded in for more of a factory look. No bondo in this truck at all. Original color was orange and floors are beautiful, rust free and still painted orange. Bumpers, grille and glass all nice. I have a tinted rear sliding window that will be included with truck as well as a clamp on rail tonneau cover that is in like new condition. Everything works on this truck including the gas gauge. Box is not original to truck, it was not that great. The wheels are Cragrar street stars and the tires are BFG T/A's and they are brand new. It has new brakes all the way around as well. Only problem that needs to be addressed before it can be driven daily is it leaks gear oil at the bottom of the third member so will need to be pulled and a new gasket installed. It does have a factory front sway bar and power steering. I have a clean clear title. I have owned this truck for about 8 years. For an extra $300 I will throw in a new carpet kit and a set of Doug Thorley Tri y headers which is less than what the headers alone cost.
Dodge Other Pickups for Sale
1978 dodge lil red express rat rod project
1941 dodge 1/2 ton pick-up project
1987 dodge le 150 pick up truck(US $3,000.00)
1982 dodge pick up truck short bed 318 with cam, factory 4 speed .(US $8,500.00)
1993 dodge ram low miles 70k true miles great truck drives like brand new efi(US $3,350.00)
1976 dodge d200 adventurer sweptline pickup truck - low milage
Auto Services in Washington
Xtreme Car Audio & Tint ★★★★★
West Seattle Brake Service ★★★★★
United Battery Systems Inc ★★★★★
Skys Auto Repair & Detailing ★★★★★
Setina Manufacturing Co. ★★★★★
Salvage Yard Guru ★★★★★
Auto blog
The Dodge Demon is leaked in Fast 8 video with Vin Diesel
Thu, Jan 19 2017It's only week two of the twelve-part Dodge Demon teaser roll out, and it already appears the metaphorical Hellcat is out of the bag. A YouTube video featuring Vin Diesel discussing The Fate of the Furious ( Fast 8) has what are almost certainly two Dodge Challenger Demons parked right in the background. So much for three months worth of build up and mystique. The two cars in the video appear to have the new logo affixed to the fender, right where the current Hellcat logo resides. In addition, the wheels and the massive hood scoop both appear to be the same relative shape as the ones briefly flashed in the latest teaser video. While we can't be 100 percent certain this is really a Demon, all the evidence points to yes. Even if this spoiled Dodge's plans, actually seeing the car here makes us even more excited for the full reveal. We still don't know all the final specs, save that it'll be 200 lbs lighter, so there is still some mystery to be had. The Challenger and Charger Hellcat twins, some of the most brazen and brutish machines currently on the road, were already cranked up to 11. The Demon, with its wide fender flares and comically large hood scoop looks makes the standard car look tame by comparison. We can't wait. Related Video: News Source: YouTube Design/Style Dodge Coupe Performance dodge demon Vin Diesel dodge hellcat dodge challenger hellcat
Cold start comparison: 2020 Alfa Romeo Giulia Quadrifoglio vs. 2013 Dodge Challenger SRT8
Thu, May 7 2020The 2020 Alfa Romeo Giulia Quadrifoglio is a five-seat, compact luxury sport sedan packing 505 horsepower thanks to a 2.9-liter twin-turbocharged V6. My personal 2013 Dodge Challenger SRT8 392 is ... well ... not. It's a full-sized muscle coupe whose iron-block 6.4-liter V8 makes 470 hp in the very traditional way: it's freakin' huge, like everything else about the car. On paper, these two have nothing in common beyond the fact that they were built by the same multi-national manufacturing entity. But if paper were the be-all and end-all of automotive rankings, everybody would buy the same car. And we don't, especially as enthusiasts. Whether it's looks or tuning or vague "intangibles" or something as simple as the way a car sounds, we often put a priority on the things that trigger our emotions rather than setting out to simply buy whatever the "best" car is at that particular moment. So, what do these two have in common? They both sound really, really good. Like looks, sounds are subjective. While a rubric most assuredly exists in the world of marketing (attraction is as much a science as any other human response), we have no way of objectively scoring the beauty of either of these cars, and the same applies to the qualities of the sound waves being emitted through their tail pipes. But we can measure how loud they are. In fact, there's even an app for that. Dozens, as it turns out. So, I picked one at random that recorded peak loudness levels, and set off to conduct an entirely pointless and only vaguely scientific experiment with the two cars that happened to be in my garage at the same time. For the test, I opened up a window and cracked the garage door (so as not to inflict carbon monoxide poisoning upon myself in the name of discovery), and then placed my phone on a tripod behind the center of each car's trunk lid. I fired each one up and let the app do the rest. I then placed my GoPro on top of the trunk for each test so that I could review the video afterward for any anomalies. I started with the Challenger. The 6.4-liter Hemi under the hood of this big coupe is essentially the same lump found under the hood of quite a few Ram pickups, and it has the accessories to prove it. Its starter is loud and distinctive. Almost as loud, it turns out, as the exhaust itself. As its loud pew-pew faded behind the V8's barking cold start, we recorded a peak of 83.7 decibels. In the app's judgment, that's roughly the equivalent of a busy street.
Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats
Tue, Nov 1 2016When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.