1971 Dodge Other Pickups on 2040-cars

Auto blog

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Dodge Viper ACR reportedly green lit [w/video]

The Dodge Viper might be getting a little more venomous in the near future thanks to a return of the performance-honed ACR trim. According to an anonymous source leaking the info to Allpar, the version would go into production in July as a 2016 model year vehicle. FCA US showed a concept for a future ACR (pictured above) at the 2014 SEMA Show that sported carbon fiber parts for the front splitter and dive planes, plus a picnic-table-sized rear wing. The body also received ducts at the rear to shoot cool air to the differential. A set of 15.4-inch carbon-ceramic brake rotors also brought things to a halt in a hurry. The company promised all the aero pieces were sculpted in the wind tunnel to give the coupe even more downforce. To shed weight, engineers chucked the radio, speakers, carpet and sound deadening out of the interior, and they replaced many bits with even more carbon fiber. All of the tweaks are necessary because the ACR moniker carries serious cachet for the Viper at the track, especially at the Nurburgring. One reportedly did a 7:22 lap around the 'Ring in 2008, and another improved that further to 7:12 in 2011. Autoblog reached out to FCA US for comment about the possibility for the hotter Viper, but the company wasn't willing to comment about any possible, future projects. Related Video:

2014 Challenger R/T Shaker, Mopar '14 Challenger bring back iconic hood

Enamored of the Dodge Challenger but wish you could get one with a shaker hood? We've got good news, because Dodge and Mopar have teamed up to bring it back.
The 2014 Dodge Challenger R/T Shaker packs the same 5.7-liter Hemi V8 as the standard Challenger R/T, but upgrades the business end with a through-the-hood exposed cold-air intake system. The retro hood scoop protrudes from the center of the hood in satin black (matching the decklid spoiler) to feed the Hemi and shakes with the engine just like the original from 1970. The Shaker model also comes with a Super Track Pak that adds a new steering rack, brake linings, shocks and 20-inch Goodyear Eagle F1 Super Car rubber. You can also shut off the stability management system completely in this car. A series of interior and exterior trim enhancements round out the look. The whole package adds $2,500 to the price of a Challenger R/T Classic for an all-in MSRP of $36,995.
In case that's not enough, Dodge is also offering a limited-edition Mopar Challenger that follows the 2010 Mopar Challenger, 2011 Mopar Charger, 2012 Mopar 300 and 2013 Mopar Dart. Limited to just 100 examples, the 2014 Mopar Challenger gets the same Shaker hood intake, unique graphics and wheels, an enhanced interior and a long list of optional extras from the Mopar parts catalog. Dodge isn't saying just yet how much the Mopar Challenger will cost, but you can bet it will command a considerable premium for the exclusivity alone.