1933 Dodge Brothers on 2040-cars

Auto blog

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Stellantis reveals STLA Large platform with EV and ICE support

Hot on the heels of a Jeep Wagoneer S teaser and photos of the prototype next-generation Dodge Charger (or Challenger), comes a reveal and details of what will likely underpin both of them: the STLA Large platform. It's one of multiple Stellantis flexible architectures that will be the basis of its upcoming electric cars, and apparently internal combustion ones, too. Stellantis says the STLA Large platform will be for D- and E-segment cars, crossovers and SUVs. In other words, it will be for midsize and large vehicles. For reference, lengths supported will be from 187.6 to 201.8 inches, and width will range from 74.7 to 79.9 inches. It will be highly flexible, too, with Stellantis claiming significant amounts of adjustability in overhangs, wheelbase, suspension placement and powertrain arrangement. The powertrain flexibility is quite impressive. Front-, rear- and all-wheel-drive layouts will be supported. Single- and dual-motor layouts will be on offer. Internal combustion will be available, too, either on its own or as a hybrid. Apparently engines can be fitted either longitudinally or transversely, too. Battery packs with between 85 and 118 kWh of capacity will be offered, with Stellantis claiming that sedan-style vehicles could have a range of up to 500 miles. The packs will also be available in 400- and 800-volt designs. Stellantis noted also that the platform can "easily accept future energy storage technologies when they reach production readiness." This seems to hint that the company is looking at different battery chemistries and maybe even solid-state batteries that could be added more easily in the future. Furthermore, the platform is designed to handle impressive output. Stellantis says that some models on the platform will have 0-to-62 mph times in the 2-second range. Limited-slip differentials for improved power delivery and wheel-end disconnects for reduced mechanical drag are also on the table for this platform. All of these details fit well with the information previously given for the concept Dodge Charger Daytona Banshee and Jeep Wagoneer S. The former was previewed with both battery voltage architectures and a wide range of electric powertrains with between 456 and 670 horsepower depending on specification and upgrades. And that's just for the 400-volt system; the 800-volt option wasn't detailed. We've also seen photos of the Charger chassis seemingly with provisions for gas engines, likely versions of the Hurricane I6.

GTC deliveries take Rauh collection up to 79 Vipers [w/video]

How many Vipers is enough? One of the ten-cylinder supercars might be too much machine for most drivers to handle, but not for Wayne and D'Ann Rauh. The Texas couple already own 77 of Dodge's flagship model. And now they've taken delivery of two more. At the Conner Avenue Assembly Plant in Detroit on Friday, the Rauhs received the keys to a pair of Dodge Viper GTCs, customized through the automaker's "1 of 1" customization program. The program allows owners to spec their Viper just the way they want it, with 50 million unique combinations. For their 78th and 79th additions, the Rauhs ordered one decked out in brown with black stripes for Wayne, the other in purple with white for D'Ann, to whom the majority of the collection belongs. Of course, both come equipped with an 8.4-liter V10 driving 645 horsepower and 600 pound-feet of torque to the rear wheels through a six-speed manual transmission. The couple will add the pair to their collection in Arp, TX, a town on the outskirts of Tyler, located between Dallas and Shreveport. The Rauh's garage already includes the last of the previous-generation Vipers decked out in two-tone gold finish. eGarage profiled the couple two years ago when their collection numbered "only" 65, and we have no doubt that number will only continue to grow as long as Dodge keeps building the legendary super-snake. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Texas Dodge Viper Enthusiasts Receive Keys to Two New Customized '1 of 1' Dodge Viper GTC Models, Now Owners of 79 Vipers Total July 24, 2015 , Detroit - Dodge Viper owners Wayne and D'Ann Rauh elevate Viper Nation enthusiasm to a whole new level. On Friday, July 24, the couple visited the Conner Avenue Assembly Plant in Detroit to receive keys to not one, but two new customized "1 of 1" Dodge Viper GTC models, making them proud owners of a total of 79 Dodge Vipers. Through the new Viper "1 of 1" customization program, owners can create their very own one-of-a-kind Snake. No two customers can order the same configuration, including color, in the same model year. With the introduction of matte-finish exterior paint, the 2016 Viper is now offered in more than 50 million unique build configurations, made up from the more than 16,000 unique paint color options and more than 48,000 unique stripe combinations.