2005 Dodge Neon Srt-4 Sedan 4-door 2.4l "big Turbo Stage 3 Upgrades!" on 2040-cars

Auto blog

Daily Driver: 2015 Dodge Charger SRT Hellcat

Daily Driver videos are micro-reviews of vehicles in the Autoblog press fleet, reviewed by the staffers who drive them every day. Today's Daily Driver features the 2015 Dodge Charger SRT Hellcat, reviewed by Greg Migliore. You can watch the video above or read a transcript below. Watch more Autoblog videos at /videos. VIDEO TRANSCRIPT: [00:00:00] Hey, everybody. It's Greg Migliore and today I am driving a 707-horsepower Dodge Charger. That can only mean one thing: I'm driving the Hellcat. Naturally, the spotlight feature of this car is the 6.2-liter supercharged Hemi V8. Makes 707 horsepower and 650 pound feet of torque. [00:00:30] Now naturally the engine sounds great and you can hear all of those horses going out the exhaust in back, which I think the Dodge guys have tuned really well. I think it's got one of the more unique sounds in the industry. All that horsepower will do that, but they've tuned it so there's a low kind of growl, and then it burbles and it's angry [00:01:00], it's visceral. I like it. It's intoxicating. It's different than other muscle cars. It's different than European exotics. I think it sounds great. I'm driving in sport right now which allows me to use the paddle shifters. I think it sounds a little better and the shifts of the eight-speed automatic transmission are a little bit more aggressive. For such a powerful car, Dodge did a nice job of tuning it to be actually pretty drivable. I just took a corner right there and the [00:01:30] steering offers you satisfying weight to your inputs. It's a little bit of a heavier steering, especially compared to some of the earlier generation Chargers. It's sporty, but it's not crazy. The design of the Dodge Charger is a critical element. That's why a lot of people buy this car, is it gives them that muscle car heritage look. The Hellcat has some special design cues that are also functional. You've got a couple of extra air intakes up front, keeps everything cool and breathing, the air flowing through; a nice spoiler in back [00:02:00] that helps keep the aero, and the downforce keeps you on the ground. The HID projector headlights really pop, especially at night, and in back you've got the LED taillights that spread out wide across the back end of this car like some of the great Chargers of the past. This car rolls on 20-inch black wheels with a spiderweb design. I think they look good. They're kind of low-key, which I think is great.

Dodge Viper to out-Hell the Hellcat with supercharged V10?

The Viper wouldn't be the Viper if it wasn't the most powerful model under the Chrysler umbrella. But with the arrival of the Hellcat engine in the Dodge Charger and Challenger, the Viper has fallen behind in the bragging rights department: where the new supercharged V8 produces 707 horsepower and 650 pound-feet of torque, the naturally aspirated V10 offers "only" 640 hp and 600 lb-ft - gargantuan output figures by almost any other standard, but crucially behind on the SRT power scale. Conner Avenue is going to have to do something about that.
Although the Hellcat's engine reportedly won't fit under the Viper's hood, SRT is now rumored to have another trick up its sleeve: supercharge the existing V10. According to the Pentastar performance enthusiasts at allpar.com, Chrysler has already taken delivery of the first such prototype engines so that it can begin the process of fitting it into an upgraded Viper.
The spooled ten-pot is tipped to produce around 800 hp and 650 lb-ft of torque. More than that and the Viper's drivetrain, chassis and bodywork would have to be substantially reworked. Though beefier transmissions are available, fitting them would reportedly set off a domino-game of changes required to handle the added torque. Which may be something Chrysler would be prepared to do for the next-generation model, but in the meantime, 800 hp could prove enough to put the Viper back atop the Mopar performance ladder where it belongs, and give it an edge against the new Corvette Z06 to rekindle sales.

FCA inline-six rumored to be real, headed for Jeep Wagoneer

In September, Allpar reported that that clues being dropped at Fiat- Chrysler headquarters, in the carmaker's factories, and on engineer resumes pointed to the development of an inline six-cylinder engine. The site has just proclaimed the rumor is reality, writing that the straight-six, "turbocharged to meet or beat 5.7 Hemi power ratings, with a smoother torque curve, is on the way." The motor's first outing is expected to be either the next-generation Jeep Grand Cherokee, debuting perhaps next year, or the Jeep Wagoneer, debuting in 2020 or 2021. "Tornado" is the purported codename for the power plant said to be just under three liters in displacement, expanding the family begun with the Global Medium Engine 2.0-liter turbo codenamed Hurricane. Engine bay constraints and a long use horizon mean engineers won't simply add two more cylinders to the GME, however. Allpar says the brief is to keep the Tornado GME-T6 — the alphanumeric for "turbocharged six" — no more than three inches longer than the Tigershark 2.4-liter four-cylinder. That means "major design changes" that could include a space-saving head, more closely spaced cylinders, and no cylinder liners. An FCA division called Comau could be called on for its "SmartSpray" plasma lining technology. Allpar muses that the standard version of the engine for Chrysler, Dodge, Jeep, and Ram could get a single twin-scroll turbocharger. Performance trims for Alfa Romeo and Maserati could get different heads and maybe twin turbos, an SRT version might also get both those tweaks. History shows that the Italian versions would make changes to the block, as well. Even so, the Tornado would be less expensive than any Ferrari-supplied V6. A straight-six would put FCA in company with current adopters BMW and Mercedes-Benz, future users like Jaguar, and perhaps Aston Martin. The engine would span the widest range of use cases in the U.S. carmaker's portfolio, though. Potential applications include being a base engine for Ram trucks, serving double duty as a base engine and 5.7-liter Hemi replacement for the Dodge Charger and Challenger, working in the high-end Jeeps, and as a properly hot trim — with Ferrari-designed heads — in the luxury Italian sports cars. The Alfa Romeo Giulia begs for just such motivation to fill the gap between the 280-hp, $42,695 Ti Sport RWD and the 505-hp, $73,700 Giulia Quadrifoglio RWD. And a twin-turbo inline-six in a Maserati Alfieri would stack up nicely with the Germans.