2013 Dodge Journey Sxt on 2040-cars

Auto blog

Stellantis mega-merger gets approval from FCA, PSA shareholders

MILAN — Shareholders of Fiat Chrysler and PSA Peugeot decisively voted Monday to merge the U.S.-Italian and French carmakers to create worldÂ’s 4th-largest auto company. Addressing separate meetings, both PSA Peugeot CEO Carlos Tavares and Fiat Chrysler Chairman John Elkann spoke of the “historic” importance of the vote, which combines legacy car companies that helped write the industrial histories of the United States, France and Italy. Before the merger is finalized, shares in the new company, to be called Stellantis, must the launched. It will be traded in Milan, New York and Paris. The marriage of PSA Peugeot and Fiat Chrysler Automobiles is built on the promise of cost-savings in the capital-hungry industry, but what remains to be seen is if it will be able to preserve jobs and heritage brands in a global market still suffering from the pandemic. The deal will create the worldÂ’s fourth-largest carmaker, with the capacity to produce 8.7 million cars a year, behind Volkswagen, Toyota and Renault-Nissan, and create 5 billion euros in annual synergies.  “We are fully aware of the fact that together we will be stronger than individually,'' PSA CEO Carlos Tavares told a virtual gathering of eligible shareholders. “The two companies are in good health. These two companies have strong positions in their markets.” The new company will put together under one roof French mass-market carmakers Peugeot and Citroen, top-selling Jeep and Italian luxury and sports brands Maserati and Alfa Romeo - pooling companies that have helped define the industry in the United States, France and Italy. While the tie-up is billed as a merger of equals, the power advantage goes to PSA, with Tavares running Stellantis and holding the tie-breaking vote on the 11-seat board. Tavares is set to take full control of the company early this year, possibly by the end of January. Fiat Chrysler chairman John Elkann, heir to the Fiat-founding Agnelli family and Fiat ChryslerÂ’s biggest shareholder, will be the Stellantis chairman. Fiat Chrysler CEO Mike Manley will head North American operations, which is key to Tavares' long-time goal of getting a U.S. foothold for the French carmaker he has run since 2014, and the clear money-maker for Fiat Chrysler. Such a deal was long wanted by Fiat ChryslerÂ’s long-time CEO Sergio Marchionne, who had predicted the necessity of consolidation in the industry. He was unable to find a deal before his sudden death in July 2018.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Dodge Challenger ADR prototypes spied with massive rubber

In an effort to give the Dodge Challenger one last hurrah before making the switch to the Giorgio platform in 2018, Automotive News reports that the automaker will come out with the Challenger ADR. The ADR, which stands for American Drag Racer, is expected to be a wide-body, Hellcat-powered variant that is closely based off of the current model. The report seems to have merit, as photographers have captured Challenger prototypes testing with massive tires. The prototypes look extremely similar to the current Challenger SRT Hellcat with the same hood scoop, front fascia design, rear spoiler construction, and rear end. The white and purple vehicles, though, are wearing extremely wide tires. The extra-wide rubber on the prototypes appear to have a similar tread design as the ones found on the Dodge Viper ACR, which features the grippy Kumho Ecsta V720. While the ACR wears 295 mm tires at the front, the car's rear tires are massive at 355 mm. The tires found on the prototype don't appear to be as large as the ones found on the ACR, but are expected to be larger than the current Challenger SRT Hellcat's, which are Pirelli P Zero Neros measuring 275 mm at all four corners. The Challenger ADR, with its wider, stickier tires is expected to cater to drivers that are looking to put all of the supercharged 6.2-liter V8's power to the ground. The rear-wheel-drive ADR is expected to come with a wide-body kit, which is missing from the prototypes. The Hellcat-powered, wide-body Challenger ADR is expected to make an appearance later in 2017, with an all-wheel-drive model (sans Hellcat engine) known as the GT AWD following closely thereafter. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery Dodge Challenger ADR Spy Shots View 16 Photos Spy Photos Dodge Coupe Performance prototype testing dodge challenger srt hellcat