2003 Dodge Grand Caravan Ex 90,000 Mi All Power Options Runs Great Dealer Maint on 2040-cars

Auto blog

FCA and Peugeot reportedly agree on merger

Citing a Wall Street Journal report, the Detroit Free Press says "Fiat Chrysler and PSA Groupe have agreed to merge." The Journal reported on talks between the two car companies only yesterday. It's said that Peugeot's board met yesterday to approve the deal, FCA's board met today, and an announcement could come as soon as tomorrow, Thursday. Both automakers have released statements, but neither company has released any information beyond admitting to ongoing talks. If the merger happens, the combined entity would become the world's fourth-largest carmaker with a $50 billion valuation, slotting in behind Toyota, the Volkswagen Group, and the Renault Nissan Mitsubishi alliance. Among the merger options possible, "an all-stock merger of equals" is the one analysts and Moody's seem to give the best grade. The reported merger would come about four months after FCA walked away from merger talks with Renault. FCA said the French government scuppered those talks over the role of Nissan in a reformed entity, but there were also brewing issues with French unions, and ongoing turmoil among Renault and Nissan leadership thanks to continuing fallout from ex-CEO Carlos Ghosn's arrest last year. FCA makes most of its revenue in the U.S. and rules Italy, while Peugeot is the second-best-selling automaker in Europe with its own brand in France and Opel in Germany. The two companies already have a partnership in Europe making vans, one that FCA CEO Mike Manley has spoken highly of. Among the list of obvious benefits in a potential merger, FCA would get access to Peugeot's small, modern platforms, $10.2 billion in cash, and electrified and hybrid architecture developments, the latter especially important to FCA as those are fields where it lags. Peugeot would get much easier access to the U.S. market, and the money-printing brands Jeep and Ram. A merged carmaker would have combined sales of nearly 9 million a year, based on 2018 results. By comparison, both Volkswagen and Toyota sell over 10 million cars a year, while the Renault-Nissan-Mitsubishi alliance almost 11 million. Peugeot CEO Carlos Tavares has proved he knows how to do turnarounds and mergers. After leaving a position as Carlos Ghosn's right-hand man in 2012, Tavares took over Peugeot in 2014, navigated a bailout from the French government and China's Dongfeng Motors in 2015, and turned PSA into a regional powerhouse.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

The Dodge Challenger plays its trump card: all-wheel drive

Perennially stuck in third place behind the Ford Mustang and Chevy Camaro in sales and enthusiast comparisons, the Dodge Challenger is doing something unconventional for a muscle couple. It's adding all-wheel drive. It's a new feature for Detroit's pony cars – none of the three have ever had it – and it could be a game-changer. Called the Challenger GT, the Dodge launches this winter for a starting price of $34,490. The Challenger GT comes with the Pentastar 3.6-liter V6 rated at 305 horsepower and 268 pound-feet of torque. It teams with an eight-speed TorqueFlight automatic transmission and is estimated to get 18 miles per gallon in the city and 27 mpg on the highway. An FCA spokesperson said no manual transmission or V8 models will be offered on the all-wheel-drive Challenger. It will be on display in January at the Detroit auto show. View 8 Photos All-wheel drive is a widely expected addition for the Challenger. The coupe shares underpinnings with the four-door Charger, which offers an all-wheel drive variant and the cars have similar powertrain offerings (the AWD Charger is also V6 and automatic only). Naturally, the Challenger borrows the Charger's AWD system and during regular driving conditions, the front axle disengages and full torque goes to the back wheels, allowing the Challenger to function as a rear-wheel drive car. It automatically goes back to AWD when more traction is needed. Handling is also fortified with a vehicle dynamic control system. Conversely, the electronic stability control has three modes and can be switched off for drift-happy enthusiasts. The GT has features familiar to other Challenger and Dodge owners, including an 8.4-inch touchscreen radio, Performance Pages (accessible through the Super Trak Pack button), and paddle shifters. A Sport Mode changes shift points to improve acceleration. It all rolls on 19-inch wheels wrapped in all-season rubber. The exterior gets a hood bulge, LED head- and taillights, and a decklid spoiler. The Challenger GT also offers a $995-interior package different than RWD models, adding Nappa leather, Alcantara suede seats, a nine-speaker Alpine audio system, performance steering wheel, and more. All of that is just window dressing. It's all-wheel drive that could be a difference-maker for consumers. The Challenger won't likely be able to take down the Mustang, which will finish 2016 as the pony car sales king.