2013 Dodge Dart Se on 2040-cars

Auto blog

Dodge vs. Chevy tug-of-war taken to the extreme

They say "idle hands are the devil's playground," but said playgrounds grow to Disney-sized proportions when a pair of jacked-up trucks, two egos, a chain and an empty mall parking lot are involved. Proof of this is the video below, which shows a Cummins-powered Dodge Ram circa 2006 to 2008 chained tail-to-tail with what looks to be a gasoline-powered Chevrolet Silverado from the late 1990s or early 2000s.
We don't necessarily have to tell you who wins this battle, but we'll let you see for yourself the lengths the "winning" driver goes to prove his point. There's plenty of foul language in the video below, so beware that this might be Not Safe For Work, and not that we should have to tell you, but please, do not try this at home.

Hellcat no help to Fiat-Chrysler's bottom-of-the-pile mpg average

What, you expected the "fastest muscle car ever" to help fleetwide fuel economy? Nope, don't think that's going to happen. That means Fiat Chrysler will likely to continue to languish at the bottom of the heap when it comes to fleetwide fuel economy among the largest automakers serving the US, especially as the automaker starts to sell its Dodge Challenger SRT Hellcat. A few hundred Fiat 500E electric vehicles aren't going to turn the trend around. See, Chrysler has once again finished at the bottom of the list when it came to fleetwide fuel economy among automakers for 2014 model-year vehicles, according to a preliminary study by the US Environmental Protection Agency. Chrysler and Fiat had an average of 21.1 miles per gallon. That substantially lagged the overall 24.2 mpg average, but it was an increase from the company's 20.9 mpg average last year and the 20.1 mpg average two years prior. For 2014, General Motors had the second-worst fleetwide fuel economy at an even 22 mpg. Fiat Chrysler does say it's working on improving its fuel economy, according to Automotive News. The company plans on making its inline-four-cylinder and V6 engines smaller, and will sell more vehicles with eight- and nine-speed transmissions. Heck, there's even a plug-in hybrid version of the Chrysler Town & Country minivan in the works for late 2015, and the company can tout fuel-efficiency gains with the Chrysler 200 and Jeep Cherokee. We would be remiss if we didn't note that, compared to its muscle-car forefathers, the Hellcat actually performs pretty well at the pump. Last month, word got out that the 2015 Challenger Hellcat, equipped either with a six-speed manual or an eight-speed automatic transmission, got a combined fuel economy of 16 mpg. Heck, the automatic-tranny version got 22 mpg on the highway. And that's for a car with 707 horsepower and a 10-second quarter-mile time. Still, with the pedal floored, the car can burn a gallon and a half of fuel per minute. Ouch.

Dodge Scat Pack for 5.7L Hemi V8 detailed, priced

Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.