1969 Dodge Dart 225 6 Cyl Auto 2 Door Solid Body Southern Alabama Car Runs Great on 2040-cars

Auto blog

Chrysler recalling over 200k vehicles across its brands

With more than 200,000 units across six separate recalls and almost all of its brands, it appears that Chrysler has officially jumped headfirst into the recall pool this month. The National Highway Traffic Safety Administration has issued three official recalls for the automaker, and The Detroit News is reporting that the automaker itself has announced three more.
The biggest of the recalls applies to about 120,000 Dodge Charger, Dodge Challenger and Chrysler 300 models for 2011 and 2012 due to faulty wiring harnesses for the seat-mounted side airbags, which could lead to these airbags not deploying in the event of a crash. A little more than 60,000 two-wheel-drive versions of the 2007-2008 Dodge Nitro and 2008 Jeep Liberty SUVs are being recalled due to a heat shield that could cause the driveshaft to break, which if that isn't bad on its own, could then hit underneath where the airbag sensor is mounted, causing the airbags to deploy. Wrapping up NHTSA's recall notices, about 20,000 Jeep Patriot and Jeep Compass models for 2012 are also being recalled due to a problem with the fuel tank transfer tube that could lead to the vehicle stalling. The LX car recall campaign is going into effect this month, while the other two will start next month - all three notices are posted below.
In addition to the official NHTSA recalls, The Detroit News is also reporting that Chrysler is recalling more than 16,000 Ram trucks and a small number of Dodge Dart sedans. Around 6,500 2013 Ram 1500 trucks will be recalled due to an improper adjustment of the parking brake cable from the factory, while 7,000 Cummins-powered 2013 Ram Heavy Duty trucks are being recalled due to an engine cover that does not have as much heat resistance as it is supposed to. Finally, a total of 46 Dodge Dart sedans are being recalled due to a problem with the brake calipers and/or parking brake.

Follow along for the 2018 Dodge Challenger SRT Demon live reveal

Updates: Live Demon premiere in Times Square and a viewing party on Woodward Ave. here in Detroit. The first Hellcat sold for about $800k at a Barrett-Jackson auction. New Pennzoil video with the last Dodge Viper premiering tomorrow. "Making the suits nervous is how we know we're on the right track." No love for accountants. "A modern day version of the Ramchargers." "The harder car companies work to take the driver out of the equation, the harder we work to keep them in." "We want to impress the NHRA more than the PTA." "It would have been easy to take a Hellcat and make it a bit faster." SRT says tuners have it all wrong. This is the way to build a performance drag car. Every Demon comes with a leather-bound manual that shows how to properly set up the car for tracks. 2.3 seconds to 60 mph 9.65 second 1/4 mile 840 horsepower This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Original Post: The 2018 Dodge Challenger SRT Demon is coming tonight, and we'll be bringing you live coverage and updates from New York. There have been months of teasers, trailers, and hints, but some of the big questions have yet to be answered. Dodge is showing the reveal live on the Demon's promo site, ifyouknowyouknow.com. Watch the stream and follow along here for the latest Demon info. The hype started back in January with the first video, "Cage." At the time, all we knew was that the Demon was going to be a hopped-up version of the already juiced up Dodge Challenger SRT Hellcat. After that, we learned that the Demon would be significantly lighter thanks to optional - yes, optional - passenger and rear seats. In addition to the seats, the Demon comes with lightweight wheels wrapped in sticky 315/40R18 Nitto drag radials at all four corners. Dodge showed off the Demon's crate of goodies, but it was a few more weeks before we learned what was inside. The Demon comes with a jack, an electric impact wrench, torque wrench, and a tire pressure gauge. The kit will be used to swap skinny front tires for use on a drag strip. As cool as those 315 section tires look up front, they hurt far more than they help on a drag strip.

FCA adds 88k Dodge Challengers to Takata inflator recall

The Takata airbag inflator recall from FCA US is growing 88,346 vehicles larger in the US after the company's discovery of the faulty parts in the 2008-2010 Dodge Challenger. The affected examples have production dates between September 19, 2007, and October 29, 2010, and the coupes need the replacement components on the driver's side. According to chronology posted by the National Highway Traffic Safety Administration (as a PDF), the automaker was auditing the models covered under the campaign in July and "identified a population of vehicles that was inadvertently excluded." Initially, FCA believed these cars were using an unrecalled Takata inflator. The audit revealed that the affected cars indeed used a recalled version. As with the rest of the faulty parts, exposure to moisture can cause them to ignite too quickly during an airbag deployment and spray shrapnel at occupants. The problem has been linked to at least eight deaths worldwide and a vehicle fire in Japan. The Challenger wasn't previously part of FCA's 3.3-million unit national campaign or the subsequent expansion. According to FCA US the parts to complete the repairs in these Challengers aren't currently available. However, owners will be notified of the issue by mail starting August 14. They will receive a second notice when the parts become available. Related Video: RECALL Subject : Driver Side Frontal Air Bag Inflator May Rupture Report Receipt Date: JUL 10, 2015 NHTSA Campaign Number: 15V444000 Component(s): AIR BAGS Potential Number of Units Affected: 88,346 All Products Associated with this Recall Vehicle Make Model Model Year(s) DODGE CHALLENGER 2008-2010 Details Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2008-2010 Dodge Challenger vehicles manufactured September 19, 2007, to October 29, 2010. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture. CONSEQUENCE: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death. REMEDY: Chrysler will notify owners, and dealers will replace the driver's frontal air bag inflator, free of charge. Parts to remedy the vehicles are not currently available. Interim notices will be mailed to owners beginning August 14, 2015.