1967 Dodge Dart Sedan - 6 Cyl - "3 On The Tree" on 2040-cars

Auto blog

Texas cops pull armed suspect from burning car

A high-speed chase through Fort Worth, Texas ended in dramatic fashion earlier this month when FWPD pulled armed burglary suspects from the burning wreckage of their escape vehicle. According to NBC DFW, Fort Worth police were dispatched to Avington Way on the evening of July 16 to investigate reports of a burglary. The burglary victim told police he had arrived home to find three individuals hauling his property out of his house. When he approached them, one of the suspects pointed a handgun at him and told him to stay back. Then all three suspects climbed into a silver Dodge Avenger and sped away. FWPD officers spotted the Avenger a short time later on Sycamore School Road and, after the car refused to pull over, the chase was on. Police chased the burglary suspects through the city at speeds approaching 100 mph until the Avenger blew a red light and was t-boned by an oncoming pickup at the intersection of California Parkway and James Avenue. As the pursuing officers closed in on the disabled car, it suddenly caught fire. One suspect bailed out and ran for it, but the remaining two were trapped inside with the flames quickly mounting. Despite the spreading fire and the threat of armed suspects in the vehicle, police officers rushed to pull the men from the wreck. The driver was removed easily, but the passenger was unconscious and trapped behind a crushed passenger door. The scene was caught on the officers' body cameras as they pried the door open with their bare hands. Eventually the officers got the semi-conscious man out of the passenger seat just as the car was completely engulfed in flames. "It was pretty dramatic. We recruit people that can think on the fly, think quickly, and perform under pressure," FWPD Sergeant Marc Povero told WFAA. All three suspects are facing charges for burglary, and the driver was charged with evading arrest. News Source: WFAA, NBC DFW Auto News Chevrolet Dodge Driving Safety Truck Police/Emergency Sedan fire car fire burglary

Fiat Chrysler expands Takata airbag recall to 3.3M vehicles

Fiat Chrysler Automobiles is expanding its recall of vehicles equipped with Takata airbags, moving beyond Florida, Hawaii, Puerto Rico and the US Virgin Islands to the greater US, as well as Mexico, Canada and beyond. The affected vehicles, some 3.3 million in total, were built between 2004 and 2007, with many models, including the Dodge Ram 1500, 2500 and 3500, Durango and the Chrysler 300, having been affected by Chrysler's previous recall. Despite the somewhat alarming nature that comes with a recall of this many vehicles, it seems that Chrysler is moving more out of an abundance of caution (and federal pressure) than anything else, saying: "Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles." Owners of affected vehicles will be notified and asked to report to dealers for a free replacement driver's side airbag. Scroll down for the official press release from FCA. Statement: Global Air-Bag Inflator Replacement December 19, 2014 , Auburn Hills, Mich. - FCA US LLC will replace driver's-side air-bag inflators in an estimated 3.3 million older-model vehicles worldwide, in an expansion of an ongoing regional field action. Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles. Outside of Florida, one of the areas covered by the original action, no FCA US vehicle has been linked to an air-bag deployment of the type that has raised public concern. Nevertheless, the Company is replacing the Takata components tied to that concern. FCA US is aware of one related injury involving one of its vehicles, an older-model sedan. It occurred in a southern Florida region marked by persistent, high, absolute humidity – a condition believed to be a contributing factor in the air-bag deployments under investigation.

We're pretty sure the Challenger SRT Demon won't have 1,121 horsepower, but what if?

Dodge's slow rollout of the upcoming Demon continues, and with it comes endless speculation about what it all means. Every video, every image, and every press release contains some clue that points towards the Demon's final specs. We don't think any of it is random or arbitrary. This week cryptic image, a small plate with a name and two numbers, shows us a little more than last week's license plate. Unfortunately, Dodge will neither confirm or deny anything, meaning we have no way of knowing which rabbit hole to go down. Don't expect to see official horsepower, a quarter-mile time, or an MSRP until the New York Auto Show. The plate is attached to the crate of goodies that comes along with every Dodge Demon. This particular one is labeled with three things: Tom Coddington, serial number 0757, and VIN 001121. The name is simple enough. According to Hot Rod, Coddington was one of the original Ramchargers, a group of engineers in the early 1960s that helped Dodge get involved in drag racing. He was a fuel system specialist, motor consultant, and a rotating garage manager. All of that could be clues. While a name is easy enough to Google, the two numbers can't be broken down so easily. The crazier theory is that the car makes 1,121 horsepower and will do the quarter-mile in 7.57 seconds. Frankly, those numbers are about as likely as the Demon actually being powered by a Rolls-Royce turbofan engine from a Boeing 757 or packing a carburetor with 1,121 CFM. The Demon is going to be street legal, and the costs associated with making a 1,121-hp car meet emissions standards alone are assuredly astronomical. As our friends from Road & Track pointed out, the more likely theory is that 757 is actually the horsepower rating. This seems totally plausible, but it means we still don't know what 1,121 means. Surely it's not a drag strip time, as the standard Hellcat will do 1/4 mile in 11.2 seconds. Like before, if you have any ideas, post them in the comments. Until April, we'll keep trying to solve Dodge's demonic puzzle. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: Road & Track, Hot RodImage Credit: FCA New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat