1961 Dodge Polara, Dart, Fully Restored on 2040-cars

Auto blog

Dodge Challenger SRT Demon TransBrake eliminates the need for brake torquing

Performing the perfect launch is key to drag racing. In order to get consistent starts, the engineers behind the Dodge Demon developed TransBrake, a system that holds the output shaft of the automatic transmission to keep the vehicle stationary until launch. Rather than the traditional method of two-foot brake torquing, the system is triggered by pulling the shift paddle for quick and consistent launches. According to Dodge, the main benefit of TransBrake versus a two-foot setup is a quicker power delivery and higher engine launch torque potential. The system gives brake-free launches up to 2,350 RPM, a 105-percent increase in launch boost pressures, and a 120-percent increase in engine launch torque. Dodge also claims that using the paddle provides a 30-percent better reaction when compared to using your feet. In addition to shifting duties from your feet to your hands, the Demon's TransBrake will preload the driveline. Torque is loaded at the wheels, not the transmission. That means full torque delivery 150 milliseconds after the shift paddle is released. It should also help reduce the driveline shock that occurs when those 315 section rear tires get near-instant grip. The reveal is coming near. Continue checking out Autoblog and ifyouknowyouknow.com every Thursday until the New York Auto Show. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. New York Auto Show Dodge Coupe Performance drag racing dodge demon dodge hellcat drag strip

Junkyard Gem: 1977 Dodge Colt Mileage Maker Coupe

While Ford and GM each had the resources to develop their own Michigan-designed subcompacts for the dawn of the 1970s— the Pinto and Vega, respectively— Chrysler couldn't afford the huge price tag for such a project. Instead, Chrysler's European operations were tapped for a couple of models that sold well enough on the other side of the Atlantic, giving us the Plymouth Cricket (known as the Hillman Avenger in the UK) and the Simca 1204 (aka the Simca 1100 in France). American car shoppers gave those two models the cold shoulder, but then Chrysler found genuine sales success by making a deal with Mitsubishi to sell the Colt Galant with left-hand drive. This became the Dodge Colt, with sales beginning in the 1971 model year. Though the 1971-1978 rear-wheel-drive Colts were once as commonplace as Corollas or B210s on American roads, they have all but disappeared today. That makes today's Junkyard Find, discovered in a Denver-area yard last week, particularly interesting. This car shows signs of having been in the hands of a speed-crazed enthusiast owner, including an aftermarket steering wheel and one-piece racing seats with slots for five-point harnesses. The primer-gray paint is another clue. The rear-wheel-drive Colts were reasonably quick for their time, and they could be made genuinely quick with basic engine upgrades. This Mitsubishi Saturn four-banger has a tube header, hot-rod ignition system, and a two-barrel (Mikuni-made) Solex carburetor. We can assume there's probably some kind of cam upgrade under the valve cover, too. The shifter is gone, but the original transmission in this car was either the base four-speed or optional five-speed manual. A three-speed automatic was available for $270 (about $1,275 today). Later on, front-wheel-drive Colts (and Mitsubishi Mirages) could be bought with the Twin-Stick overdrive rig, which gave drivers eight forward speeds and the opportunity to make Twin-Stick beer taps. The 1977-1978 Dodge Colt two- and four-door sedans were based on the Mitsubishi Lancer and were a bit smaller than the 1971-1977 cars, while the wagon version moved to the Galant Sigma platform. The build tag shows that this car started life as the cheapest 1977 Colt model, the "Mileage Maker" two-door sedan (Dodge dealers called it a coupe, so that's what I'm calling it in the title).

Dodge Challenger ACR rumored finally on its way using Viper ACR as benchmark

In 1995, Dodge released the ACR Neon, an unlikely combination of cheap, compact American sedan and high-performance parts and engineering marked by initials standing for American Club Racer. Dodge sold a heap of them, so the automaker flexed the ACR brand's potential with the first ACR Viper in 1999. The racy coupes made huge noise for Dodge and the Viper. After the fourth-gen Viper ended production in 2010, Dodge took a Challenger ACR concept to SEMA in 2011. But instead of carrying the coupe to production, Dodge resurrected the Viper for 2013 and got one more Viper ACR model out during the last Viper's final years. With the Viper gone again, it appears Dodge is sorting out that Challenger ACR concept for real. Last October, Mopar Insiders reported the automaker was trying to get a Challenger ACR prepared for the model's 50th anniversary this year. The timing looks highly unlikely, but an Allpar source says the track-happy coupe is still coming, and with bonkers expectations and gear. We're talking about a big-boi widebody Challenger tuned to do hard laps, fast, around twisty circuits, all day long. An Allpar insider known as "Muther," a code name to tug at John le Carre's heart, said Dodge is considering two engines. Because the point of the car is to be raced and some series don't accept forced induction, one trim would fit the naturally aspirated 392 Hemi from the R/T Scat Pack. There's no telling if that motor would get a power bump, but the Challenger ACR concept upped its output slightly with measures like a cat-back exhaust. The other trim, naturally, would fit the 6.2-liter Hellcat Redeye V8.     Muther told Allpar that if engineers can get the car under 4,000 pounds, the math points to being within two seconds of the time set by the Viper ACR-E at Road America. That "E" represents the Extreme Aero Package, with addenda like a deeper front splitter, dive planes, and an adjustable, dual-element rear wing that helped the Viper ring up 14 lap records on U.S. tracks. The fastest time we know of for a Viper at Road America is from 2011, factory race driver Kuno Wittmer doing 2:20 even in a Gen IV Viper ACR. Wittmer's ride weighed 3,408-pounds. Dodge boffins want to get the Challenger ACR under 4,000 pounds. Achieving the weight goal would mean cutting at least 387 pounds from a standard R/T Scat Pack Widebody, and 512 pounds from the Hellcat Redeye Widebody if that trim has the same target.