1999 Dodge Dakota R/t on 2040-cars

Auto blog

Dodge Challenger Shakedown: '71 body, new guts

While Jeep has created a number of vintage-bodied custom vehicles with modern components, this year's SEMA show plays host to Dodge's take on the idea. The Shakedown concept began life as a 1971 Challenger and ditched almost everything in it, including the engine and chassis. What's left is a modern car with a retro look. The chassis was a particularly complicated part of the job, since the Challenger was originally a unibody car. However, Dodge chose to separate the Challenger's iconic body from its structural parts, and moved it onto a custom, one-off chassis from which the body can be removed as needed. The chassis also carries lowered suspension, Challenger Hellcat brakes, and a 6.4-liter 392 Hemi V8 connected to a six-speed manual transmission from the Viper. Dodge also installed the engine using the new Hemi engine swap kit from Mopar. With the shaker cold-air intake and custom exhaust, the Shakedown's powerplant makes 485 horsepower. View 13 Photos The body itself received plenty of tweaking as well. Dodge shaved off the drip rails, door handles, and turn signals for a cleaner look, and also fitted the grille, headlights, and taillights from a 2017 Challenger. The whole thing is finished in matte black paint with a "vibrating" stripe offset on the left side. The Shakedown also gets 20-inch Slingshot rear wheels and a pair of custom 19-inch versions for the front. On each fender is a bright red "392" decal that uses the same font as the labels on classic Mopars 360 cubic-inch V8s. Inside, the Shakedown gets the same radical upgrade as the chassis. Two Viper seats accompany a Viper steering wheel, and the rear seats are gone altogether. The Viper gearbox is shifted with a Challenger Hellcat gear knob, and carbon-fiber accents and leather adorn the wheel, door panels, instrument panel and center console. Related Video: Image Credit: FCA, Joel Stocksdale SEMA Show Dodge Coupe Concept Cars Performance

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Special Dodge Challengers get Hellcat bits to celebrate Mopar's 80th birthday

This year, Mopar is celebrating its 80th anniversary, and it's doing so in two-tone style with this very limited edition Dodge Challenger. Only 160 of these Challengers will be built, with 80 in each paint scheme. Buyers can choose between either Billet Silver or the slightly painful sounding Contusion Blue, each of which gets a hand-painted Pitch Black top half. These Challengers are based on the existing 392 Shaker package, but come with an array of upgrades and tweaks. In addition to the custom two-tone paint, the shaker scoop and rear spoiler are painted in the same color, rather than the usual matte black. The cars come with 20-inch wheels and hand-painted 392 logos on the fenders. The 392 cu. in., or 6.4-liter if you prefer, engine produces the same 485 horsepower and 475 lb-ft of torque as its normal counterpart. This Mopar Challenger will have more access to cold air, though, since it has both the shaker scoop and the headlamp intake from the Challenger Hellcat. At the back, there's also exhaust tips borrowed from the most hellish of Challengers. Or at least the most hellish, so far. View 14 Photos Inside, the changes are more minor. Performance seats are added with embroidered Mopar logos in the backrests. The seats and other trim also feature a silver-colored Tungsten stitching. Naturally, a serial number badge makes an appearance inside, too. Owners will also receive a little box of goodies including a booklet, signed rendering, keychain, additional badge, and a certificate showing the date of manufacture. The overall package is rather attractive, but it isn't cheap. To own one of the few Mopar Challengers, you'll have to fork over $56,885. That's a significant premium over the 392 Scat Pack Shaker, which starts at just $44,890 and makes just as much power. You'll also be able to get a 392 Scat Pack Shaker right away, while the Mopar special edition won't be out until spring. Plus, you may not get it until summer because the hand-painting process takes some time. Of course, for some people, the cost and the wait are worth the exclusivity. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.