1968 Dodge Coronet R/t 440 on 2040-cars

Auto blog

8 things you learn while driving a cop car [w/videos]

Let me start off with the obvious: it is absolutely illegal to impersonate a police officer. And now that that's out of the way, I'd just like to say that driving a cop car is really, really cool. Here's the background to this story: Dodge unveiled its redesigned 2015 Charger Pursuit police cruiser, and kindly allowed Autoblog to test it. That meant fellow senior editor Seyth Miersma and I would spend a week with the cop car, and the goal here was to see just how different the behind-the-wheel experience is, from a civilian's point of view. After all, it's not technically a police car – it isn't affiliated with any city, it doesn't say "police" anywhere on it, and it's been fitted with buzzkill-worthy "NOT IN SERVICE" magnets (easily removed for photos, of course). But that meant nothing. As Seyth and I found out after our week of testing, most people can't tell the difference, and the Charger Pursuit commands all the same reactions as any normal cop car would on the road. Here are a few things we noticed during our time as wannabe cops. 1. You Drive In A Bubble On The Highway Forget for a moment that our cruiser was liveried with Dodge markings instead of those of the highway patrol. Ignore the large "NOT IN SERVICE" signs adhered around the car. Something in the lizard brain of just about every licensed driver tells them to hold back when they see any hint of a cop car, or just the silhouette of a light bar on a marked sedan. Hence, when driving on the highway, and especially when one already has some distance from cars forward and aft, a sort of bubble of fear starts to open up around you. Cars just ahead seem very reluctant to pass one another or change lanes much, while those behind wait to move up on you until there's a full herd movement to do so. The effect isn't perfect – which is probably ascribable to the aforementioned giveaways that I'm not really a cop – but it did occur on several occasions during commutes from the office. 2. You Drive In A Pack In The City My commute home from the Autoblog office normally takes anywhere from 25 to 30 minutes, and it's a straight shot down Woodward Avenue from Detroit's north suburbs into the city, where I live. Traffic usually moves at a steady pace, the Michigan-spec "five-over" speed.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Corvette Z06 and Viper TA square off at the strip

There are many long-standing grudge matches among automobiles: 911 vs GT-R, Mustang vs Camaro, Ferrari vs Lamborghini... but as far as high-end American metal goes, it doesn't get much more legendary than Viper vs 'Vette. So after Chevy released the new Corvette Z06, we knew it was only a matter of time before it would have to square off against the Viper TA. And what better place to pit these two parallel pillars of American performance than on the drag strip? Fortunately that's just what we have here. In one corner, the 2014 Dodge Viper TA, with its 8.4-liter V10 pumping out 640 horsepower and 600 pound-feet of torque. In the other, the 2015 Chevrolet Corvette Z06, the supercharger on its 6.2-liter V8 more than making up for the discrepancy in displacement and cylinder count to produce 650 hp and just as much torque. But numbers don't tell the whole story, so watch the video clip to see which reaches the end of the quarter-mile first. News Source: To the Floor via YouTubeTip: James Chevrolet Dodge Videos drag race chevy corvette z06 quarter mile drag strip srt viper ta