New 2013 Dodge Challenger R/t Hemi New on 2040-cars

Auto blog

Dodge closes Caravan order books at the end of this month

After being introduced as the Dodge Caravan in 1983, after debuting a long wheelbase Grand Caravan in 1987, after entering its fifth generation in 2007 and going almost unchanged since then to become the oldest minivan in the segment, after being publicly sent to the slaughterhouse in 2011, again in 2013, and again in 2015 before being pardoned thrice by the automotive governor, this month it's over for good for the best-selling Dodge and best-selling minivan in the U.S. and Canada. At least, according to Mopar Insiders, which credits dealer sources for the news that "the end of the month" will be a car shopper's last chance to order the Dodge Grand Caravan in the states that don't adhere to California emissions. Since the Grand Caravan's 3.6-liter V6 can't clear CARB mandates, Dodge pulled the model from the 13 so-called ZEV states in March this year.  Last summer, an analyst at AutoForecast Solutions told Automotive News that Dodge would cease Grand Caravan production at the Windsor Assembly Plant in Ontario, Canada in May this year. The brief reprieve is said to be related to the coronavirus standstill, Fiat Chrysler not alone in revising its plans to make up for two months of lost production. The new 2020 Chrysler Voyager is the official replacement for the Dodge, being a de-contented Pacifica that returns an old Chrysler nameplate to circulation and is built in the same plant as the Pacifica and Grand Caravan. The Grand Caravan's numbers have come down this year, but Dodge still sold a strong 24,931 units through the first quarter of the year; the kid-hauler has sold less than 100,000 units in a year in the U.S. only twice since 1985, topping six figures for the last four years. In 35 years on sale here, the minivan has hurdled the 200,000-unit marker 19 times. With the order books open until the end of the month and Windsor plant working a single shift and still finding its feet, Grand Caravans will continue to trickle off the lines after May, but not for long. 

Preserved truck found at the bottom of frozen lake

A fisherman in central Minnesota pulled more than bluegill and bass out of his local fishing hole earlier this month. While ice fishing on Mayhew Lake, a local man was startled when, using an underwater camera to scout for fish, he discovered a vehicle sitting on the lakebed, the SCTimes reported. He immediately called the Benton County Sheriff's office, which sent deputies to examine the vehicle. Once they arrived, the deputies used their own camera to have a look and discovered a late-90s to early-00s model Dodge Ram pickup in roughly 12 feet of water. The Sheriff's department dive team was then dispatched to search the truck and the area surrounding it for bodies or valuables. The truck was lifted from the lakebed through a huge hole in the ice. The Sheriff's office ran the plates and discovered that it was reported stolen in March of 2000 from a nearby address. Investigators believe that given the truck's location, almost 100 yards from the lake's public access ramp and 25 yards from the north shore, that it was driven on to the lake while it was frozen, then allowed to sink to the bottom once the ice melted. Thanks to the lake's frigid waters, the truck was surprisingly well preserved. Aside from a missing grille, a coating of mud inside, and a patina of rust on the sheet metal, there was little damage to the truck despite its long rest in the lake. With an engine full of lake water and the damage done by roughly sixteen freeze-thaw cycles, the truck will never run again, but its condition is a good testament to the build quality of those old Rams. It certainly held up better than that '57 Plymouth Belvedere they buried in the time capsule under the Tulsa city courthouse. News Source: SCTimesImage Credit: Benton County Sheriff's Office Government/Legal Weird Car News Dodge Truck water lake

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat