1973 Dodge Challenger on 2040-cars

Auto blog

Dodge recalling 2k SRT Hellcat Challengers and Chargers for fuel leak

Bad news for fans of the obscene output of the Dodge Hellcat twins, as FCA has announced a voluntary recall of both 707-horsepower variants of the 2015-model-year Charger sedan and Challenger coupe. According to FCA, a total of 2,211 cars are being recalled after a dealer discovered a "possible fuel leak" during a pre-delivery inspection. Despite getting cleared by suppliers, FCA claims its engineers found "improperly installed" hose seals. Owners of affected vehicles will receive notification and be asked to report in for repairs. Of the vehicles affected, the overwhelming majority, 2,012, were sold in the US market. The remainder were sold in Canada (148), Mexico (30) and just 21 outside of North America. Scroll down for the official release from FCA. Related Video: Statement: Hose Seals March 1, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 2,211 cars globally to replace fuel-delivery components that may leak. An FCA US dealer alerted the Company to a possible fuel leak following a pre-delivery vehicle inspection. These components had passed the supplier's leak-testing, but FCA US engineers launched an investigation and discovered certain hose seals may have been improperly installed. The Company is unaware of any related injuries, accidents or customer complaints. Affected are model-year 2015 Dodge Challenger SRT coupes and Dodge Charger SRT sedans equipped with 6.2-liter V-8 engines. There are an estimated 2,012 in the U.S.; 148 in Canada; 30 in Mexico and 21 outside the NAFTA region. Affected customers will be notified and advised when they may schedule service. Customers with questions or concerns may call the FCA US Customer Information Center at 1-800-853-1403.

Dodge Viper returning to Le Mans this year?

If you were among the fans disappointed by Chrysler's recent decision to end the Dodge Viper's racing program, we may have some good news for you, as the racing outfit behind the campaign is reportedly working to bring the American supercars back to Le Mans this year. That racing outfit is Riley Technologies, a constructor perhaps best known for its Daytona Prototypes, but it has also prepared its share of GT racers, too. Chrysler charged Riley with leading its racing program for the new Viper GTS-R, campaigned it in the United SportsCar Championship and the 24 Hours of Le Mans. Auburn Hills made the unfortunate decision back in March to pull its Vipers out of Le Mans, and then in October to withdraw from the US series, as well, thereby effectively ending the program altogether. Disappointed though it surely was, Riley remains defiant. The North Carolina-based company is planning on taking the existing Vipers back to Le Mans on its own, with or without factory support. The Viper has, after all, proven a capable machine, having taken both the drivers' and teams' titles in the United SportsCar Championship this past season. "With Le Mans, every driver and every manufacturer needs to have their first trip there, and it isn't always what you want it to be, but we did show reliability and did have some pace," Bill Riley told Racer.com. "Since then, we've worked hard on the cars, they're now strong, front-running cars in the US, and we're working with the ACO on the BoP to make sure the cars are strong at Le Mans. They're super-reliable and fast, and we'd expect to be right in the mix with the other cars." Riley has kept the existing support staff in place, and once it secures its driver lineup and sponsors, chances look good that it could represent America well at Le Mans this year in either the GTE Pro or GTE Am class. Its predecessor did, after all, complete a three-year winning streak that saw it dominate the GTS class right up until its withdrawal in 2000. News Source: Racer.comImage Credit: FCA Motorsports Dodge Coupe Racing Vehicles

Dodge Challenger ADR prototypes spied with massive rubber

In an effort to give the Dodge Challenger one last hurrah before making the switch to the Giorgio platform in 2018, Automotive News reports that the automaker will come out with the Challenger ADR. The ADR, which stands for American Drag Racer, is expected to be a wide-body, Hellcat-powered variant that is closely based off of the current model. The report seems to have merit, as photographers have captured Challenger prototypes testing with massive tires. The prototypes look extremely similar to the current Challenger SRT Hellcat with the same hood scoop, front fascia design, rear spoiler construction, and rear end. The white and purple vehicles, though, are wearing extremely wide tires. The extra-wide rubber on the prototypes appear to have a similar tread design as the ones found on the Dodge Viper ACR, which features the grippy Kumho Ecsta V720. While the ACR wears 295 mm tires at the front, the car's rear tires are massive at 355 mm. The tires found on the prototype don't appear to be as large as the ones found on the ACR, but are expected to be larger than the current Challenger SRT Hellcat's, which are Pirelli P Zero Neros measuring 275 mm at all four corners. The Challenger ADR, with its wider, stickier tires is expected to cater to drivers that are looking to put all of the supercharged 6.2-liter V8's power to the ground. The rear-wheel-drive ADR is expected to come with a wide-body kit, which is missing from the prototypes. The Hellcat-powered, wide-body Challenger ADR is expected to make an appearance later in 2017, with an all-wheel-drive model (sans Hellcat engine) known as the GT AWD following closely thereafter. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery Dodge Challenger ADR Spy Shots View 16 Photos Spy Photos Dodge Coupe Performance prototype testing dodge challenger srt hellcat