4dr Sdn Se V6 New Sedan Automatic Engine: 3.6l V6 24v Vvt -inc: E85 Capable, Eng on 2040-cars

Auto blog

Mopar rolls out new Scat Packages for Dodge Challenger, Charger and Dart

Dodge buyers looking for that extra performance edge, take note: Mopar is bringing back the Scat Pack. Announced at the SEMA Show in Las Vegas today, the new Scat Packages will be available in three stages for the Challenger, Charger and Dart starting next spring.
Upgrades for the Charger and Challenger equipped with the 5.7-liter Hemi V8 engine include a
new cold-air intake and cat-back exhaust, as well as a remapped ECU. Upgrade to the Scat Package 2 and you get a new camshaft, and the Scat Package 3 tosses in ported and polished heads and hi-flow headers. Upgrades for the Dart GT with the smaller 2.4-liter, four-cylinder Tigershark engine with six-speed manual transmission start with a cold-air intake, short-throw shifter and upgraded brakes. The second stage kicks in a remapped ECU and cat-back exhaust, while the Scat Package 3 for the Dart gives you even bigger brakes, an adjustable suspension and sway bars front and rear.

Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats

When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.

Watch Atieva's electric van outrun a BMW i8 and Dodge Viper

A little while back, automotive startup Atieva drag raced its electric van, called Edna, against a Tesla Model S and a Ferrari California in order to compare its performance against known and revered mechanical athletes. Again, the Silicon Valley-based company is putting its prototype up against electrified and conventionally powered performance vehicles on the drag strip. Last time around, Edna, the Mercedes-Benz Vito van equipped with a 900-horsepower, all-wheel-drive powertrain, bested both of its foes. In that showcase, Edna was hitting 60 mph in a little over three seconds. Comparatively, BMW lists the i8's 0-60 time at 4.2 seconds, though Road & Track clocked it at 3.8 seconds, with a quarter-mile time of 12.3 seconds. The Viper does 0-60 in 3.4 seconds. Before you even watch the video above, you can imagine how it will end, as the retuned Atieva Edna rips 0-60 mph in 2.94 seconds. Atieva clocked the quarter mile at 11.3 seconds at 117 mph. It's worth noting that driver skill can have a lot to do with a car's straight-line performance. We've witnessed Viper's elapsing the quarter mile in well under 12 seconds, which means it should be quicker in this test than the i8, if not the Edna. Still, the performance showcased in the video is exceptional. To improve Edna's stats, Atieva says it has used testing data to fine tune its AC induction motors at higher speeds once it got low-speed performance locked in. After testing in the hot California sun, including the race you see above, Atieva drove Edna 90 miles home with range to spare. As for production plans, Atieva will put this powertrain into a sedan slated for sale in 2018. In the meantime, the company will keep testing and tuning its working prototype, and has even invited the public to put their cars up against Edna in future sessions. Related Video: Related Gallery 2015 BMW i8 in Petoskey, MI News Source: Atieva, YouTube: Atieva via Electrek Green Motorsports BMW Dodge Automakers Electric Future Vehicles Videos drag race atieva