2007 Town & Country Lx Wheelchair Handicap Accessible Van on 2040-cars

Auto blog

Junkyard Gem: 1989 Chrysler TC by Maserati

Lee Iacocca's friendship with Alejandro de Tomaso went way back, and it led to the Ford-powered De Tomaso Pantera being born in 1971 (when Iacocca was running Ford). After Iacocca moved over to head Chrysler in 1978, he began working with de Tomaso (who owned Maserati by that point) to develop a sports coupe based on the Chrysler-salvation K-Car platform. It took quite a while, but eventually that car became reality: the Chrysler TC by Maserati (officially known as Chrysler's TC by Maserati). Some 7,300 were built through 1991, and I've found one of them in a Denver-area car graveyard. I've managed to document four of these cars in their final parking spots prior to this one, in wrecking yards in Colorado, California, and Wisconsin. The Chrysler's TC by Maserati does have a devoted following, but they can't save 'em all. The TC really was assembled by Maserati in Italy, but the underlying chassis was taken from the Dodge Daytona. The body bore a strong resemblance to that of the Chrysler LeBaron GTC, which was unfortunate considering the price difference between the two cars: the MSRP on the 1989 TC was $33,000, while the LeBaron GTC cost $17,435 (that's about $80,880 and $42,730 in 2022 dollars). The TC had three different engines driving the front wheels over its short lifetime: two varieties of turbocharged Chrysler 2.2 four-cylinder (one with 160 horsepower and one with a Cosworth cylinder head with 200 horsepower) and that good old workhorse of a Mitsubishi V6: the 6G72, with 141 horses. This car has the 160hp 2.2. The Cosworth-headed cars (500 were built) got a five-speed manual transmission, but the other 6,800 TCs got a Chrysler slushbox of either three or four speeds (this one is a three-speed). There was a lot of snobbish disapproval of the TC by the automotive press, but just look at that interior! Even the most over-the-top LeBaron never got this level of swank inside.  Every time I write about one of these cars, I hear that the factory hardtop roof is worth fantastic money… but four out of the five examples I've found in junkyards had the hardtop, and I think every single one went to the crusher with its car. How many miles? Not many! Maybe the speedometer cable broke in 1995. The radio and HVAC controls are straight LeBaron, but the wood and leather are the real thing.

Chrysler may be testing a Hellcat 300

Another day goes by, and another mysterious, undisguised SRT prototype comes out of FCA. This time we have a Chrysler 300 SRT that looks nearly stock except for its footwear. Our spy photographer got up close and personal with this machine, and found that it has the same wheels with 315-mm tires that were on the early Dodge Demon prototypes. The only difference is the wheels on this 300 have Chrysler-branded center caps. All that extra width means these wheels stick pretty far out from the wheel wells, which would suggest that any production car running this setup would have flares to cover the wheels. Behind those wheels are four-piston Brembo calipers and slotted discs that looks similar to those on the current 300 SRT. We doubt that Chrysler is building a Demonized version of the 300, but the tires do suggest that this is a much more potent 300 than the current SRT, which was discontinued in the US in 2015 but is still sold in the Middle East and Australia. That's not all we have to go on, though, since our spy photographer says it sounded like it had Hellcat power under the hood. Equipping a 300 with a Hellcat engine would be a breeze, too, since the engine is already in the Charger, which is virtually identical mechanically. What you may be wondering is why Chrysler is adding a Hellcat version of the 300 SRT when that model hasn't been available in the US since 2015. One possible reason is that this would finally allow Aussies access to the 707-horsepower machine. Dodge is not a brand offered Down Under, so it doesn't get the Charger Hellcat, leaving the 300 as the only V8, rear-drive Mopar available. And for the Middle East, if the normal 300 SRT was selling well, it would only make sense to offer another variant. It shouldn't cost Chrysler too much to develop this model either, since the 300, mechanically, is virtually identical to the Charger. Related Video: Featured Gallery Chrysler 300 SRT Hellcat Widebody Spy Photos View 16 Photos Image Credit: Brian Williams Spy Photos Chrysler Performance Sedan chrysler 300 srt8

Dodge Viper production to end after 2017

We can't say we're surprised, but we're still saddened to report that the Dodge Viper will not live on past the 2017 model year. It's had a solid 25-year run, though, and that's worth celebrating. Fiat Chrysler Automobiles does just that for the Viper's final model year, with five special editions (some of which seem less special than others, admittedly): The 1:28 Edition ACR, GTS-R Commemorative Edition ACR, VoooDoo II Edition ACR, Snakeskin Edition GTC, and Dodge Dealer Edition ACR. Instead of running through what makes each of these 2017 Vipers special, we'll direct your attention to the press release below and the images above. All but the Dodge Dealer Edition commemorate memorable Viper models of the past 25 years, and the GTS-R is probably the pick of the litter with its classic blue-on-white paint scheme. Unless you prefer to err on the side of gaudy, in which case Dodge has you (and your car) covered with Snakeskin Green. If none of these special-edition Viper models strikes your fancy but you'd still like to park a 2017 Viper in your garage, fret not. Dodge is still offering its "1 of 1" customization program for the Viper's final year of production. Finally, instead of dwelling on the past, even when that past is as exciting as the Viper's, let's choose to look to the future with the only logical question left unanswered: What's next? Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.