2024 Chrysler Pacifica Touring L on 2040-cars

Auto blog

NHTSA preparing to wallop FCA, automaker 'failed to do its job'

As embattled the National Highway Traffic Safety Administration may be, but that certainly doesn't mean it isn't willing or able to put the smack down on automakers that violate its recall procedures. Following a public hearing on Thursday, the government safety arm is preparing what will likely be some very serious punishments for Fiat Chrysler Automobiles. FCA stands accused of mishandling 23 individual recalls covering some 11 million vehicles since 2013, with NHTSA claiming the Italian-American automaker kept it "in the dark," failing to notify the government of safety defects. Uncle Sam also alleges that FCA failed to notify consumers of important safety notices and didn't provide a steady supply of replacement parts. For these charges, the automaker could be fined up to $35 million per recall, which could mean a maximum of $805 million in fines. FCA could also be forced to buy back the unrepaired vehicles. "We have serious concerns with Fiat Chrysler notifications to owners and to NHTSA about its recalls. In every one of the 23 recalls, we have identified ways in which Fiat Chrysler failed to do its job," Jennifer Timian, the head of the Office of Defects Investigation, said during the FCA hearing, The Detroit News reports. The company also "repeatedly failed to provide NHTSA with other critical information about its recalls, including changes to the vehicles impacted by the recalls and its plans for remedying those vehicles." Fiat Chrysler, for its part, didn't really fight back during its hearing, although Scott Kunselman (shown above during the hearing), the senior vice president of vehicle safety and regulatory affairs at FCA, did tell The News that, "We absolutely had no mis-intent." "The plan is to move forward," Kunselman said, adding that the company has "fallen short," and that "some of the things we've done were sloppy." NHTSA administrator Mark Rosekind told The News that the regulator would issue its sanctions by the end of July, adding that he saw no way that FCA could avoid punishment.

FCA inline-six rumored to be real, headed for Jeep Wagoneer

In September, Allpar reported that that clues being dropped at Fiat- Chrysler headquarters, in the carmaker's factories, and on engineer resumes pointed to the development of an inline six-cylinder engine. The site has just proclaimed the rumor is reality, writing that the straight-six, "turbocharged to meet or beat 5.7 Hemi power ratings, with a smoother torque curve, is on the way." The motor's first outing is expected to be either the next-generation Jeep Grand Cherokee, debuting perhaps next year, or the Jeep Wagoneer, debuting in 2020 or 2021. "Tornado" is the purported codename for the power plant said to be just under three liters in displacement, expanding the family begun with the Global Medium Engine 2.0-liter turbo codenamed Hurricane. Engine bay constraints and a long use horizon mean engineers won't simply add two more cylinders to the GME, however. Allpar says the brief is to keep the Tornado GME-T6 — the alphanumeric for "turbocharged six" — no more than three inches longer than the Tigershark 2.4-liter four-cylinder. That means "major design changes" that could include a space-saving head, more closely spaced cylinders, and no cylinder liners. An FCA division called Comau could be called on for its "SmartSpray" plasma lining technology. Allpar muses that the standard version of the engine for Chrysler, Dodge, Jeep, and Ram could get a single twin-scroll turbocharger. Performance trims for Alfa Romeo and Maserati could get different heads and maybe twin turbos, an SRT version might also get both those tweaks. History shows that the Italian versions would make changes to the block, as well. Even so, the Tornado would be less expensive than any Ferrari-supplied V6. A straight-six would put FCA in company with current adopters BMW and Mercedes-Benz, future users like Jaguar, and perhaps Aston Martin. The engine would span the widest range of use cases in the U.S. carmaker's portfolio, though. Potential applications include being a base engine for Ram trucks, serving double duty as a base engine and 5.7-liter Hemi replacement for the Dodge Charger and Challenger, working in the high-end Jeeps, and as a properly hot trim — with Ferrari-designed heads — in the luxury Italian sports cars. The Alfa Romeo Giulia begs for just such motivation to fill the gap between the 280-hp, $42,695 Ti Sport RWD and the 505-hp, $73,700 Giulia Quadrifoglio RWD. And a twin-turbo inline-six in a Maserati Alfieri would stack up nicely with the Germans.

2017 Chrysler Pacifica isn't your parents' Town & Country [w/video]

I'm sick of people hating on minivans. There's something about two incredibly functional sliding doors that give people this idea that they've given up, and given in to family life. But if the van you see here had two fixed rear doors, and maybe an extra inch of ride height, it'd be gobbled up like mad as part of the growing crossover craze. So yes, the 2017 Chrysler Pacifica – that's right, Pacifica – is a minivan. But it's so packed full of features, technology, and functionality, that you really ought to look past those sliding doors. There promises to be an incredibly rewarding vehicle within. The 2017 Pacifica rides on an all-new platform, but dimensionally, it's similar to the outgoing Town & Country. That whole "ugh, minivans" thing is one of the reasons why Chrysler decided to axe the Town & Country name for 2017. Simply put, the target customers for the new minivan (young parents) would have grown up in their parents' Town & Country vans (or Caravans, or Voyagers...) in the 1980s. Three decades later, FCA wants to make it absolutely clear that this isn't just your parents' minivan. Why it chose to bring back the name of a lackluster part of its mid-2000s history, though, is anyone's guess. The 2017 Pacifica rides on an all-new platform, but dimensionally, it's similar to the outgoing Town & Country. It's a tenth of an inch shorter in length, about an inch wider, and roughly half an inch taller. The body itself looks great – influence from the 200 sedan is obvious up front, and around back in the taillights, and top-trim models can be had with 20-inch wheels – a big change from the old van, which topped out with 17-inch rolling stock. There's big weight-savings here, too – the Pacifica tips the scales at 4,330 pounds in base spec, which is over 300 pounds less than the Town & Country. Inside, it's more of the same from Chrysler. The interior design uses language brought up from the 200, and the different color and material choices look really rich, especially in Limited Premium trim. Of course, I'll wait to make final judgments on the cabin until I see it in base cloth spec, rife with kid fingerprints and french fries ground into the carpets. Up front, the Uconnect 8.4-inch touchscreen houses familiar infotainment functionality, and for backseat passengers, there's a new Uconnect Theater system, with a pair of 10-inch touchscreen displays.