2018 Chrysler 300 Series Limited Awd 4dr Sedan on 2040-cars

Auto blog

2015 Chrysler 200 gets 36 mpg with Tigershark four-cylinder

Chrysler has come out with the official fuel economy information on the new 200 following the info that was leaked from the EPA earlier this week. It turns out that our initial report of 18 miles per gallon in the city and 29 mpg on the highway for the all-wheel-drive V6 was correct.
What we didn't know at the time, though, was what sort of economy the 200's other powertrain options managed. Outfitted with the 2.4-liter four-pot, Chrysler is promising 23 mpg in the city and 36 mpg on the highway, with a combined rating of 28 mpg. Those figures are fairly impressive; besting figures of the 2.5-liter Ford Fusion and tying the 1.5-liter, EcoBoost, non-start-stop model. It's also beats the four-cylinder Toyota Camry's 35-mpg highway figure while tying its combined efficiency.
Stepping up to the 295-horsepower Pentastar V6 pushes the economy down to 19 mpg in the city, while the highway figure is a respectable 32 mpg for the front-driver. The combined rating for the FWD V6 is 23 mpg. Those figures can't quite match the 270-horsepower 2.0-liter, EcoBoost four of the Fusion, which nets 22 city and 33 highway. In fact, the V6 200 has trouble besting even the 3.5-liter V6 of the Camry, which returns 21 mpg city and 31 mpg highway. Again, though, the 200 is noticeably more powerful.

FCA's Pentastar V6 gets more power, efficiency for 2016

Already a vital member of FCA's powertrain lineup, the 3.6-liter Pentastar V6 is receiving major efficiency improvements for 2016. Thanks to a massive amount of new tech attached to the mill, fuel economy is up six percent, and torque below 3,000 rpm jumps nearly 15 percent. The updates arrive first in the 2016 Jeep Grand Cherokee, but they should proliferate to other models eventually. At least in the Grand Cherokee, the tweaks push power up five horsepower to 295 ponies. FCA's engineers went through the Pentastar from top to bottom to eke out as much efficiency as possible. For example, there's now a two-speed variable-valve lift system that can run in low- or high-lift modes. This upgrade is responsible for 2.7-percent better economy, the company claims. A new intake manifold with longer runners and updated variable-valve times also helps boost the torque output. Further improvements come from pushing the compression ratio to 11.3:1, from 10.2:1 before. Perhaps most impressive is that despite all of the innovations, the latest Pentastar actually weighs four pounds less than the current version. Beyond the Pentastar improvements, all of the FCA US gasoline engines, except for the Viper's 8.4-liter V10, will be E15-compatible for 2016. The company says that it wants to be ready for the higher ethanol content fuel's greater use in the near future.

Chrysler Group moves around execs in wake of recent departure

Chrysler is busy shuffling executives around in the wake of Ram head Fred Diaz's departure. The automaker has named Reid Bigland (pictured, right) as Diaz's successor in the role of president and CEO of Ram, though Bigland will continue his duties as the head of US sales and the president and CEO of Chrysler Canada. Bigland first came to Chrysler in 2006 from Freightliner Custom Chassis Corporation, so the guy knows a thing or two about trucks.
Meanwhile, Timothy Kuniskis will take over as president and CEO of Dodge. Previously, he served as the head of Fiat in North America and has been with Chrysler in one capacity or another since 1992. His old title now falls to Jason Stoicevich, who will also continue to work as the director of the automaker's California Business Center. Finally, Bruno Cattori will take over as the president and CEO of Chrysler Mexico.
Diaz left his position to take over as a divisional vice president of sales and marketing with Nissan. You can read the full press release on the Chrysler personnel changes below for more information.