2002 Chevy Tracker on 2040-cars

Auto blog

Buick takes top spot in 2022 J.D. Power Initial Quality Study

People, economies, and supply chains weren't the only things continuing to get sick over the past year. The 2022 J.D. Power Initial Quality Study (IQS) is out, showing the average rate of problems per 100 vehicles (PP100) during the first 90 days of ownership increased overall. The average figure for the 32 ranked manufacturers in 2020 was about 166 problems per 100 vehicles. In the 2021 IQS, that dropped to an average of 162. This year, the average jumps to 180 problems. J.D. Power says that figure is a record high over the 36-year history of the study. Buick leapt to the top of the rankings this year with the fewest issues, at 139 problems per 100 vehicles in the first 100 days of ownership. After Dodge became the first American automaker to lead the IQS in 2020, followed by Ram in 2021, this year marks a three-peat for U.S. carmakers. Dodge took second this year at 143 PP100, Chevrolet third with 147 PP100, Genesis the first luxury maker on the chart in fourth with 156 PP100. Between February and May, this year's study gathered responses to 223 questions from more than 84,000 new 2022-model-year car owners and lessees. The questions are designed to zero in on real-world problems new owners encounter with nine categories of vehicle features: Infotainment; features, controls and displays; exterior; driving assistance; interior; powertrain; seats; driving experience; and climate. As has been the case in the past few year, infotainment has proved to be the most problematic bugbear making scores worse. Considering features individually, six of 10 of the worst problem areas dealt with infotainment, causing infotainment's score of 45 PP100 to be 19.5 PP100 worse than the second-placed feature. Consumers ranked getting Android Auto and Apple CarPlay to connect reliably as the most troublesome.  GM didn't just score with Buick, which was one of only nine of the 33 ranked brands to show improvement this year. The conglomerate earned first place with the fewest PP100 among all the automaker groups, and scored the most model-level awards with nine, ahead of BMW with eight and Hyundai Group with three.  This year's study again showed a gap between luxury and mass-market makers, thought to be down to the amount of tech in luxury vehicles that consumers aren't properly informed about or that doesn't act as expected — that latter issue exacerbated by the chip shortage.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck