2002 Chevrolet Tracker Zr2 Sport Utility 4-door 2.5l on 2040-cars

Auto blog

2016 Chevy Malibu exhaustively tested with four decades of data

Chevy is preparing to unveil its new Malibu sedan at the upcoming New York Auto Show next month. But when it does, it's not like it will have appeared overnight. The development of any new vehicle – especially one as widely produced by a major automaker as the Malibu – involves rigorous and relentlessly punishing tests. In the Malibu's case, that meant 1.5 million miles of driving from the scorching heat of Arizona in July to the frigid cold of northern Canada in January and everything in between. The Bowtie brand also says it incorporated four decades' worth of data taken from vehicles driving in locations around the world since 1972 in order to make the Malibu the best it could be. We'll have to wait to find out the results of all that exhaustive testing, but you can catch a sneak peek at the new sedan in the video above. Four Decades of Data Used to Test 2016 Chevrolet Malibu Recorded customer use drives durability testing for next-generation midsize sedan 2015-03-11 DETROIT – Data collected over decades from across the globe is helping ensure the 2016 Chevrolet Malibu can handle the world's worst roads even if the all-new midsize sedan never drives on them. Data collection boxes are placed in cars in real-world driving conditions around the world. Since 1972, these devices have accurately recorded the harshness and frequency of every jounce, bump and shudder inflicted on the car on roads in the U.S., Russia, Saudi Arabia and developing markets. "Although most Malibu owners will never put their car through similar abuse, we test all new vehicles in extreme climates, inclement weather and on punishing road surfaces," said Dan Devine, Malibu validation engineer. "The 2016 Malibu is definitely up to these challenges." Tests like these ensured the current generation Malibu was dependable and durable, two qualities that in turn helped Malibu stand out from its rivals in important quality surveys, such as J.D. Power's Initial Quality Study and Vehicle Dependability Study. General Motors engineers analyze the data to calculate the precise amount of damage potholes and other hazards create over 150,000 miles. Then the conditions are replicated at GM's Milford Proving Ground in Michigan on three unique road courses, each riddled with simulated potholes of increasing severity. Engineers run preproduction cars through the course up to hundreds of times.

GM re-recalls 11k SUVs

General Motors is recalling a bunch of previously recalled SUVs because, well, they still aren't quite fixed. The latest repairs are necessary on 10,974 SUVs in North America, including 9,932 in only the US. Affected models include the 2006-2007 Buick Rainier, Chevrolet Trailblazer, and GMC Envoy; plus the 2006 Trailblazer EXT and Envoy XL. While not listed by NHTSA, a statement by GM to Autoblog says the 2006-2007 Saab 9-7X and Isuzu Ascender are also affected. In these SUVs, it's possible that liquid could get into the driver's door master power window switch module and cause a short circuit. This could potentially lead to a fire, and owners are urged to park the vehicles outside until repaired. GM has been trying to fix this issue for years. It started as an investigation into fires, and that led to a recall for about 250,000 vehicles in cold-weather states. A nationwide campaign came in 2013 for 193,000 of them in the US. Last year, the automaker decided to replace the whole module as a repair. However in a recent investigation of these recalls, GM discovered that this latest group of SUVs never received the new part. According to documents submitted to NHTSA (as a PDF), "Some dealers incorrectly used the labor code associated with module replacement when, instead of replacing the module, they only added a protective coating to the module." To fix things this time, the models finally get the correct component. Related Video: GM Statement General Motors is recalling 9,932 older midsize SUVs in the U.S. because they were mistakenly excluded from an earlier recall. Certain 2006 Chevrolet TrailBlazer EXT and GMC Envoy XL, and 2006-2007 TrailBlazer, Envoy, Buick Rainier, Saab 9-7X and Isuzu Ascender vehicles may continue to have a condition in which the printed circuit board inside the driver's door may corrode and short if exposed to certain fluids such as melted snow containing road salt. GM is aware of four fires but no crashes, injuries or fatalities associated with the expanded recall. The total number of vehicles being recalled, including Canada, Mexico and exports is 10.974. Customers are urged to park these vehicles outside until repairs have been made. GM reported this recall to the NHTSA on September 23.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck